New Rage Cycles fender eliminator

Ducati Forum

Help Support Ducati Forum:

NOLA said:
You looking for daytime or night time video ?
Click to expand...

Preferably daytime so I can see the visibility. Safety is big for me because I've been in 2 major accidents (ok one was a deer and visible signals wouldn't have really helped there...lol)

Really appreciate it whenever you get around to it! I was debating between Rizoma and Comp Werkes before you posted about this kit, which I had never heard of. So thanks again for enlightening me and the rest of the forum.
 
transdesigner said:
Preferably daytime so I can see the visibility. Safety is big for me because I've been in 2 major accidents (ok one was a deer and visible signals wouldn't have really helped there...lol)

Really appreciate it whenever you get around to it! I was debating between Rizoma and Comp Werkes before you posted about this kit, which I had never heard of. So thanks again for enlightening me and the rest of the forum.
Click to expand...

Yes sir, no prob. I will work on it this weekend. I tried to make a video already and it came out like crap. I'll try harder.

They really are nice in the daytime. I actually stopped using hand signals. And the guy who makes them is improving the design so it will be even nicer.

NOLA
 
NOLA said:
Thats at night with no flash from cam. The LED white light illuminator is very bright. Almost not possible for cops to say you dont have an illuminated plate, and thats its not visible from 50ft.

I can take some daytime ones if you want also.
Click to expand...

So , it in fact does have a a dedicated plate light? And if so, is it this " LED white light illuminator" you speak of ?
 
Just installed mine
 

Attachments

  • 001.jpg
    001.jpg
    86.8 KB
  • 002.jpg
    002.jpg
    86 KB
Mitchell201198 said:
I might have to buy this kit, I like it. Was the installation hard?
Click to expand...
Pretty straight forward. The installation instructions are available here: https://www.newragecycles.com/v/vspfiles/assets/images/1199_899 Fender Eliminator Kit.pdf
If you don't mind the soldering you will be just fine. I hate to admit it but my wife did the soldering since she is a former electronics fabricator.
You need a hair dryer to shrink the heat shrink tubing which is included.
Hope this helps.
 
Last edited:
Eeek! I didn't realize this required soldering. Looks like I'll need to find a way to wheel her inside the apartment to make it happen.

I've been lurking around reading different experiences for fender kits - I'm pretty sure I'm getting this one. It's just....clean.

I don't mind the blinking speed either.

Thanks for the writeup!!
 
zaster said:
Pretty straight forward. The installation instructions are available here: https://www.newragecycles.com/v/vspfiles/assets/images/1199_899 Fender Eliminator Kit.pdf
If you don't mind the soldering you will be just fine. I hate to admit it but my wife did the soldering since she is a former electronics fabricator.
You need a hair dryer to shrink the heat shrink tubing which is included.
Hope this helps.
Click to expand...

Doesn't look too hard, I wonder if the led mirror block off blinkers are any good?
 
CrashAstern said:
Eeek! I didn't realize this required soldering. Looks like I'll need to find a way to wheel her inside the apartment to make it happen.

I've been lurking around reading different experiences for fender kits - I'm pretty sure I'm getting this one. It's just....clean.

I don't mind the blinking speed either.

Thanks for the writeup!!
Click to expand...

I did mine without any soldering. I just used barrel connectors and shrink wrapped them with a hair dryer.

In the next couple of days I will have the upgraded unit in my hands to install. Its all metal construction and larger thicker Lexan turn signals on it. The same unit that the pics just got posted below.

The install was really easy as the tail does not need to come off. Just the lower part is replaced.
 
NOLA said:
I did mine without any soldering. I just used barrel connectors and shrink wrapped them with a hair dryer.

In the next couple of days I will have the upgraded unit in my hands to install. Its all metal construction and larger thicker Lexan turn signals on it. The same unit that the pics just got posted below.

The install was really easy as the tail does not need to come off. Just the lower part is replaced.
Click to expand...

Exactly, that's the way to go if you don't like soldering. Had my wife as the soldering expert and the equipment on hand...hence my approach;)
 
I'm currently running the CW unit, but this certainly is an interesting alternative. However, I think I may actually prefer the look of the slimmer LED turn signal bar. Has there been any indication as to whether this will continue to be offered alongside the thicker bar?
 
NOLA said:
I did mine without any soldering. I just used barrel connectors and shrink wrapped them with a hair dryer.

In the next couple of days I will have the upgraded unit in my hands to install. Its all metal construction and larger thicker Lexan turn signals on it. The same unit that the pics just got posted below.

The install was really easy as the tail does not need to come off. Just the lower part is replaced.
Click to expand...

Ahh good call - that sounds way easier than dealing with a couple stairs and 2 90* turns :p.

Or going out to buy a >100' extension cord.
 

Similar threads

Vicati
For Sale Panigale 1299s and Panigale 959 Full bolt ons
Replies
11
Views
762
Vicati
Vicati
BP PanigaleV4S
Fairings from Flamingo Corse
Replies
12
Views
1K
BP PanigaleV4S
BP PanigaleV4S
C
New Rage Cycles Fender Eliminator kit for Vandemon Undertail exhaust small problem fixed
Replies
0
Views
554
cycler
C
J
  • Locked
SOLD! NEW V4 Mirror Block Off Turn Signals by New Rage Cycles, 90$ + shipping
Replies
2
Views
286
JCSTUDIO
J
C
For Sale FS: 2015 BMW S1000R with premium and sports package. Low miles and tons of mods
Replies
6
Views
559
cycler
C

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top