Pocher model Panigale 1299 S

Ducati Forum

Help Support Ducati Forum:

I'm going to go grab the key to my 1 : 1 race replica and ring the neck off it........

:cool:
 
Caribbean Rider said:
Hi Micheal..

unbelievable, can't wait until mine arrives.

Did you order your kit at Autograph Webshop in Germany as well? I did and I have to say they are not top noch in answering emails or sending tracking numbers.

As far as I know the shipped the showcase but for the kit I still did not receive any tracking numbers..
Click to expand...

Hi, Yes i ordered by Autograph in the very beginning (September/October last year) and was lucky to receive one kit of their first Batch in January.
I personally think their Service is very nice. I always got fast Response to mails. Tracking number not always, right. But this is a very reliable shop. Might be a bit busy when they try to ship the large amount of kits of the ducati, why they did not send you right away a tracking number.




Thanks for all other coments. Will add Pictures to my OneDrive account (link above) when there is any Progress.

Best regards,
Michael
 
miko3572 said:
I am working also on mine since 3 weeks.
I intend to do some modifications to the base kit, since i am an Detail Freak, and think there can be done some improvements everywhere.

In General a nice kit for a novice model builder. But to be honest i expected a bit more from pocher. Considering the scale (1/4) i expected they had created the parts like on the real bike (like Joints and mounting Points of main subassemblies - engine to Frame,.....) Additionally a lot of parts are molded in one Piece together instead of doing them as seperate parts. Again for a scale of 1:12 - fine; but in this scale i expected more from pocher. Also they only provide "Phillips screw typs" in the kit for all the parts instead of allen-head nuts and bolts like on the real bike. And especially on the engine some bolts are molded to the parts (looking like the real nut while the bolt next to it should be replicated with the phillips head screw :-(
But nothing that can not be fixed :)

I made a lot from etch parts and made a lot new parts on lathe and mill

Here is a link to my OneDrive Folder for a building Progress with the modifications so far.


https://onedrive.live.com/?id=DC8456CEF4B1C692%2120566&cid=DC8456CEF4B1C692


And for the tool kit that is mentioned above i also like to know what that should be.
For the kit you only Need a small phillips screw Driver and a Special tool to adjust the chain Tension on the rear wheel hub. AND THAT IS ALREADY INCLUDED IN THE KIT!! :)
Best regards,
Michael
Click to expand...

Mother of god! That is amazing! How much would you estimate a kit like this would cost all in?
 
Pocher Ducati Panigale 1299 S 1/4 scale metal model kit HK107

miko3572 said:
Hi, Yes i ordered by Autograph in the very beginning (September/October last year) and was lucky to receive one kit of their first Batch in January.
I personally think their Service is very nice. I always got fast Response to mails. Tracking number not always, right. But this is a very reliable shop. Might be a bit busy when they try to ship the large amount of kits of the ducati, why they did not send you right away a tracking number.

Thanks for all other coments. Will add Pictures to my OneDrive account (link above) when there is any Progress.

Best regards,
Michael
Click to expand...
Beautiful work, Michael. I am building my first kit box-stock except for some painting, but will add some extra details to the second one.

  1. Will you be sharing your work with Uli at Autograph for a future transkit?
  2. Do you mind if I link fellow model builders to your OneDrive photos, or should I send them to this forum instead?
  3. Autograph has always been efficient to deal with on my end. I can empathize with being a one man shop when things get busy and falling behind on emails, etc.
Brady
 
miko3572 said:
I am working also on mine since 3 weeks.
I intend to do some modifications to the base kit, since i am an Detail Freak, and think there can be done some improvements everywhere.

In General a nice kit for a novice model builder. But to be honest i expected a bit more from pocher. Considering the scale (1/4) i expected they had created the parts like on the real bike (like Joints and mounting Points of main subassemblies - engine to Frame,.....) Additionally a lot of parts are molded in one Piece together instead of doing them as seperate parts. Again for a scale of 1:12 - fine; but in this scale i expected more from pocher. Also they only provide "Phillips screw typs" in the kit for all the parts instead of allen-head nuts and bolts like on the real bike. And especially on the engine some bolts are molded to the parts (looking like the real nut while the bolt next to it should be replicated with the phillips head screw :-(
But nothing that can not be fixed :)

I made a lot from etch parts and made a lot new parts on lathe and mill

Here is a link to my OneDrive Folder for a building Progress with the modifications so far.


https://onedrive.live.com/?id=DC8456CEF4B1C692%2120566&cid=DC8456CEF4B1C692


And for the tool kit that is mentioned above i also like to know what that should be.
For the kit you only Need a small phillips screw Driver and a Special tool to adjust the chain Tension on the rear wheel hub. AND THAT IS ALREADY INCLUDED IN THE KIT!! :)
Best regards,
Michael
Click to expand...


Wow, that's some kit!
I was all set for buying this but now not sure as it looks like a lot of time needed to build it! Wonder if a built up bike available to buy?
 
Pocher kit build time

chillo said:
Wow, that's some kit!
I was all set for buying this but now not sure as it looks like a lot of time needed to build it! Wonder if a built up bike available to buy?
Click to expand...
Should take less than 40 hours to build, unless you are Michael and can't stop making your own bits.
 
chillo said:
Wow, that's some kit!
I was all set for buying this but now not sure as it looks like a lot of time needed to build it! Wonder if a built up bike available to buy?
Click to expand...

Hi Chillo

As Brady (Scaleautoworks) already said, the kit builds up very easy. Actually there is not even the need to paint the parts, as most of them are already pre-painted; ncluding some plastic (sprue) parts. And the parts not pre painted are most often hidden that it is not a must and still get a nice bike model when finished.
So do not see my "WIP" as the base. The 40 hours could be right to build the kit out of box.



Best regards,
Michael
 
scaleautoworks said:
Beautiful work, Michael. I am building my first kit box-stock except for some painting, but will add some extra details to the second one.

  1. Will you be sharing your work with Uli at Autograph for a future transkit?
  2. Do you mind if I link fellow model builders to your OneDrive photos, or should I send them to this forum instead?
  3. Autograph has always been efficient to deal with on my end. I can empathize with being a one man shop when things get busy and falling behind on emails, etc.
Brady
Click to expand...



Hi Brady

Thanks for your words.

About your questions:
1) I have not thought about it to be honest.
I have all the plans for the new turned and milled parts, as well for all the etched parts on Hand (done with CorelDRAW) or some 3d printed parts (designed with AutoDesk Inventor) but for now there is no conversation going on with Uli or anyone else of doing a trans kit.
And i am not interested in one untill i am ready with my bike to see and know if all the new parts fit and work together.

2) Yes, you can link my OneDrive-site to your web-site.

Best regards,
Michael
 
Last edited:
Getting there....

Taking my time but getting there slowly.....

Bike1.JPG
Bike2.JPG

Bike3.JPG
Bike4.JPG
 
Scubainstructor said:
3a5c1711bf46dd9ce0d8cb28dce60e87.jpg
96fb9fb074a47317bca053d1288caf5e.jpg
Click to expand...

Great work Simon,

Something for me to do when I retire. I used to love making models when I was young.

I have purchased one of the 1:12 scale kits but have not opened the box. I also have a z900 kit and a 900 SS bevel kit but they are all still in the box. Just no time. Late night Ebay impulse buys.
 
we made a fender eliminator for the 1:1 bike..

of course we had to make it for the Pocher 1:4 model as well then..
 

Attachments

  • IMG_3840.jpg
    IMG_3840.jpg
    39.9 KB
  • IMG_4644.jpg
    IMG_4644.jpg
    44.9 KB
bradp51 said:
I just opened the box for one of these Tamiya kits. Got it on Amazon. They sent it straight from Japan to Australia.



Now to find the time to build it.
Click to expand...


I can confirm that it takes some time :)...but it also gives a lot of satisfaction once you see it. I have sent the pictures to a friend of mine which asked me why I have dismounted the fairing of my Pani (the real one) ehehehehe
 
Some pics of 1/4 Pocher and others. Thanks to ScaleModelAutos for support. Now for ride on my 1:1 Panigale R w/CMC rotors, etc.
 

Attachments

  • 20160413_111451.jpg
    20160413_111451.jpg
    101.7 KB
  • 20160413_111410.jpg
    20160413_111410.jpg
    99.5 KB
  • 20160413_111058.jpg
    20160413_111058.jpg
    93.4 KB
  • 20160413_111048.jpg
    20160413_111048.jpg
    93.6 KB

Similar threads

J
Panniers for Panigale
Replies
0
Views
42
Jaegermeister
J
S
For Sale 2017 1299 base - complete part out (second thread)
2
Replies
24
Views
786
SirJAG
S
Vicati
For Sale Panigale 1299s and Panigale 959 Full bolt ons
Replies
11
Views
781
Vicati
Vicati
S
  • Locked
SOLD! 2017 1299 base - COMPLETE PART OUT
2
Replies
36
Views
1K
SirJAG
S
C
For Sale 2016 959 Panigale
Replies
13
Views
326
SirJAG
S

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top