V4R Details?

endodoc · Dec 18, 2018

Leftcoast32, Dude you are in Carlsbad, Im in Newport Coast. Let go ride. Im really only a .... on the board ok well thats not true but I am less of a .... in person (jeez one of you guys vouch for me will ya).

realnuts · Dec 19, 2018

you're not always a .......

good enough?

RD16RR · Dec 19, 2018

ohhhh boy....i can see endo has settled in to his comfort zone

chillo · Feb 5, 2019

jarelj said:
The V4R will take the same Akra exhaust as the other V4 models, only difference is the mapping that gets downloaded to the ECU. When we first got them we were told to plan for around 6 hours and after installing a couple it was clear that it's a 2-day job for one tech to complete so we charge 10 hours for the install. I wish it wasn't that, but that's reality. Everything is so tightly packaged and lots of "stuff" to disassemble to get to everything and then put it all back together.

Mutt1979 said:
Unless I'm mistaken all of the shots of the R already have the pipes with stock end cans? Maybe just not in titanium? so you may be able to get the full performance with slip-ons, just not the weight savings.

Just an observation.

Blackbrush said:
The "R" has different primary tubes than the other models. Is it possible the only real difference between it and the full Akra is the second half of the exhaust?

anyone got any more details about the Akra race system?
Is it different to the one on the 1103cc motor?
Is the R oem downpipe same as the Ti race system but just an SS pipe?
Are the primary (downpipe tubes) different on the R?

pic from Ducati configurator of the akra system, part number same as on the 1103 motor?
https://configurator.ducati.com/bikes/ww/en/superbike/panigale-v4-r/3503064/?cid=ZBJP5KVMN2G0WNY
v4r configurator

chillo · Mar 16, 2019

So my v4r has arrived, pdi done! Akra race exhaust fitted and some carbon bits, eco tech rad guards and tail tidy.
Removing clutch cover before collecting which hoping will be next Saturday!
Fired it up today and OMG!

️
Can't wait!

scotman623 · Mar 16, 2019

Congrats!! Mine will be here in about 2 weeks!! Then Full Akro being installed, Carbon fiber clutch cover, Racing Switches both sides, kickstand delete, Quick change disk setup and full Racing prep... I will be Racing mine the End of April at Thunderbolt in NJ. USA..

chillo · Mar 17, 2019

chillo · Mar 17, 2019

I have the half carbon clutch cover on order but it’s not due until end of April, I’ve asked the dealer to just remove the OEM cover and I’ll ride without

scotman623 · Mar 17, 2019

chillo said:
I have the half carbon clutch cover on order but it's not due until end of April, I've asked the dealer to just remove the OEM cover and I will ride without

Yes, The Carbon fiber clutch cover is the only part I have to wait for too!!! Back ordered till May 14th in The USA

GME56 · Mar 17, 2019

scotman623 said:
Congrats!! Mine will be here in about 2 weeks!! Then Full Akro being installed, Carbon fiber clutch cover, Racing Switches both sides, kickstand delete, Quick change disk setup and full Racing prep... I will be Racing mine the End of April at Thunderbolt in NJ. USA..

Same here mine is supposed to be here in two to three weeks.
If you don't mind what racing switches are you putting on.
Do they plug right in?.
Where did you buy them from "Boulder Motor Sports"?

Appreciate any info.

chillo · Mar 19, 2019

Clutch cover now in the bin!

PanigaleV4S · Mar 19, 2019

chillo said:
Clutch cover now in the bin!

I can't get over how much nicer the V4R looks over the V4. So aggressive with the gills in the fairings and the polished tank. Love it!

scotman623 · Mar 19, 2019

GME56 said:
Same here mine is supposed to be here in two to three weeks.
If you don't mind what racing switches are you putting on.
Do they plug right in?.
Where did you buy them from "Boulder Motor Sports"?

Appreciate any info.

bikesportdevelopments.co.uk Reatains everything the stock switches have.. Made for the new V4R... Directions look very simple plug and play.

GME56 · Mar 19, 2019

scotman623 said:
bikesportdevelopments.co.uk Reatains everything the stock switches have.. Made for the new V4R... Directions look very simple plug and play.

Thanks, then Ducati Omaha will have them.

JohnSmith · Mar 21, 2019

scotman623 said:
Yes, The Carbon fiber clutch cover is the only part I have to wait for too!!! Back ordered till May 14th in The USA

HEyoooooooioo

Sent from my iPhone using Tapatalk Pro

scotman623 · Mar 21, 2019

Mine just arrived today

scotman623 · Mar 21, 2019

KarlKani said:
HEyoooooooioo

Sent from my iPhone using Tapatalk Pro

I'm so excited about Racing this bike

chillo · Mar 24, 2019

200 miles done on mine yesterday and wow it feels very different to the s! It’s VERY taught and stiff, really is a proper race bike this! Amazing!
The way the bike revs with very little inertia in the motor is something else! The bark with the race kit nuts!
Will report more as I get more miles on it and can start to use it properly.

jpanigale · Mar 24, 2019

I see 650ib dyno'd his already with only 30 miles on it. 196.7hp rwhp

chillo · Mar 31, 2019

600 miles on mine now taking it steady following running in keeping it below 8k and the fuel light comes on at 83 miles! wtf! what's it going to do when I properly ring its neck!
(I used to get 60-65 miles before fuel light came on with the v4s, but that was when I thrashing it!)
Can see the RS19 bike has a larger capacity fuel tank maybe that’s what will be needed!
First service tomorrow

V4R Details?

Help Support Ducati Forum:

endodoc

realnuts

RD16RR

chillo

chillo

scotman623

chillo

chillo

scotman623

GME56

chillo

PanigaleV4S

scotman623

GME56

JohnSmith

scotman623

scotman623

chillo

jpanigale

chillo

Similar threads

Register CTA

Recent Discussions