For Sale www.redline-moto.com

Ducati Forum

Help Support Ducati Forum:

Kat

Kat

Joined
Nov 24, 2016
Messages
19
Location
USA
Hey all,

Full Titanium Panigale 1199/1299 exhaust.

Check this out. Feedback is welcome.

www.redline-moto.com

Red%2BLine%2BRear%2BPic.JPG
 
Last edited:
looks pretty sweet! If I didn't already have Akras these would be something to really consider.
 
Thank you!

They do look great. But they sound even better!!!

The sound is really unique and unmistakable!

Check out the videos that are linked.

Thanks!
 
Pricing and details are on the site...

$2800 full titanium stystem. Both headers included.

Weighs 10lbs. With hardware.
 
Yes.

Our bellypan started out simple enough.

But as we made different designs, the project has morphed into a race pan that works for the street guys.

We were annoyed that other race pans (including the one from picture below) required fairing cutting, removal of the fan, or cutting the fan housing.

The Redline pan, encloses the belly, and scoops over the top of the fan. We eliminated the need to modify the stock fairing.

So if you want close off the belly like the Panigale on our website, then you will have to get a belly pan.
 
Last edited:
We have been getting a lot of PM and emails through the site.

First off, thank you for all the interest. We have had tons of fun making this system. And are huge enthusiasts of the sport.

We started this project to first get rid of heat generated by the twin belly cans/mufflers on the Panigale. The bike literally melted the exhaust valve cable. We were forced to change it.

So, we began making our own system (modeling the Superleggera) that did the following:
1. Reduce Heat (We ran as much as 17F cooler)
2. Reduce Weight (Redline SL = 10lbs, Stock = 24lb, Akra = 17.5lb)
3. Make HP (Dyno Data Coming)
4. Sound Awesome - Check out the videos
5. Look Great - Check out the photos, Turns Purple after use...Giggidy

We'll update the website with more photos and information.

Again, thank you for the questions. We appreciate it.
 
Kat said:
One more tail photo. Sorry, my photos are not as good as the marketing guys.
Click to expand...
Termignoni-esque manifolds w/Akrapovic-esque endcans/mufflers...full titanium a plus w/sectional welds :drool:

Very nice and thanks for sharing!
 
Yes. The two headers were tricky. The horizontal cylinder especially. Some parts are machined, but the front is an actual titanium mold.

Weight savings is huge!

We are doing a twin can design for a few others now as well.
 
A few more photos...

IMG_2290.JPG


This second image is great. You can see that we aren't cooking the oil any longer.

IMG_2287.JPG
 

Similar threads

B
BT Moto / BrenTuning Tuning solutions Ducati V4
5 6 7
Replies
125
Views
4K
Chriss
Chriss
M
For Sale 1199/899 PANIGALE termignoni updated CARBON FIBER EXHAUST HEAT SHIELD glossy
Replies
0
Views
127
MotoDuc83
M
iXiBLADEiXi
My 1st Ducati from Vegas
Replies
2
Views
113
iXiBLADEiXi
iXiBLADEiXi
XEROXTEAM
Want To Buy Termignoni titanium exhaust for Panigale 1199/1299
Replies
0
Views
309
XEROXTEAM
XEROXTEAM
S
For Sale Panigale V4 SP2 - Full Akrapovic - Warranty to July 2026 - EU
Replies
1
Views
313
spooky
S

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top