fork

I have a question about the fork preload adjustment on a Streetfigher V4. In the manual (german) it says to start on a fully opened setup. The say to fully open it it should be turned all the way clockwise and then turned 7 rounds counter-clockwise to set it to normal street preload. My...

Hey guys, have a new to me 20 V4, but for some reason I find this bike to be very hard to turn. For a backstory I will say my friends have a 2019 V4S and at one point in their early setups I thought that bike turned in way to easily. I suppose the updates for 2020 remedied that instability. But...

Hello everyone I HAVE FOUND THE SOLUTION TO INSTALL QUAD LOCK FORK STEM MOUNT TO YOUR DUCATI PANIGALE. I MADE A SHORT VIDEO FOR THE INSTALLATION AND I HOPE YOU FIND THIS HELPFUL. THANKS FOR HAVING ME.

Hey there. Ok I'm building a custom race bike. I'm going to be using 1199s forks one it. Couple questions. First, if you wanted to go to manual cap adjustments what do the stepper motors caps do? Just spin rods all the way down in the fork as a manual would? I see people asking this similar...

Looks like the maintenance schedule calls for changing fork fluid at 36months. When are you guys changing yours? I've heard the school of though that you dont open them up until they starts leaking. If it matters, I'm specifically interested for the 1299s. Does your answer change if it's...

I had my 19 V4 on the track Friday. I was setting up and testing the new Attack rear sets, RG Tank grip pads and new EBC GPFAX front pads. Control over the bike felt better and more connected. It took three adjustments on the rear set foot peg positions. I think its good. Connection to the...

I need a Marzocchi lower tube, straight and dent free, and with the black coating fully intact and not worn through anywhere

Anyone have a guide to do 1199s fork oil replacement and seals. Dave moss covers standard ohlins but doesn't covers electronic ohlins.

Hi all. I recently bought a 13mm - 15mm fork stem camera mount for my V4. I was told by the seller it would fit but the stem on the bike seams hollow. The mount fits the top ok but has nothing to hold on to in the middle. Can this be used or do I need to look at a different place to...

So ive developed the leaking front fork on my base 1199. Thankfully it happened at the end of the season so im not out riding time. Now heres where im looking for some help, I remember reading that the OE seals arent the way to go but i cant find out which ones are the good ones. Can anyone...

Hi, Anyone put the Rizoma front fork slider on their V4? Any feedback? https://www.carbon4us.com/en/ducati-performance/7674-front-fork-slider-ducati-performance.html

Hey guys, my 1199S Tri is much too stiff in the front. I recall reading Ducati has the forks setup for riders of about 180-190lbs which is much heavier than I (138lbs).....who sells the lighter fork springs for the S model and what is involved in getting them changed for the stock internals?

Can anyone confirm that the S comes with the Shell product listed in the manual? I want to raise the oil level but want to be sure to use the same product that is already in the forks...

For the guys that have S or Speciale... Do your Ohlins front fork make a noticeable whoosh sound during compression on rough roads? Mine is pretty noticeable. Just wondering if it's normal. I rode a loaner base V4 with the Showa and it's definitely quiet.

Front fork stand i used a few times for my 1299 but it'll work for any model I'm sure. I think it's venom brand, works just as it should, nothing wrong with it. *this is for the black one pictured, not the pit bull stand* $45 shipped

Hey guys whats up? I have a base 2015 1299. Im looking into installing a bitubo rear shock and the bitubo drop ins. Someone offered me a bitubo rear shock and bitubo drop ins for a good price as a package. They have an S model and upgraded from the bitubo to a different setup. The rear shock...

Some imput please. I have a 2015 1299 panigale. What are your thoughts if I dropped a adjustable bitubo adjustable fork drop in suspension into my standard 1299 panigale. Is it worth it or should I keep it the way it is. i track my bike about 10 to 12 times a year. The rest is street...

Hi! Does anyone know if the 899 original fork springs are linear or progressive? I've tried to find info all over the internet but with no luck. The rate is spot on for me but I'd prefer linear springs. Thanks.

Thought this may help other panigale s owners who happen to break the jst clip that holds the 4 wires controlling their ohlins forks. They are at one end of the loom, so dont think you can just replace the cable you either have to replace the clip or change the loom. Snorkelbat sells the kit...

About 1000 track miles on the 1199S since the fork seals were replaced. Left fork has a little thin line of oil developing. No where near enough to actually run off the fork. (sorry, wiped it off before I could think of taking a picture) I don't think much of it but thought I would toss the...