issue

All, Please see hyperlink below to the latest Ducati Magazine (if your interested). http://www.ducati.com.au/news/new_redline_magazine/2015/06/08/3749/index.do?limit=all&utm_source=newsletter&utm_medium=email&utm_content=redlinemagazine&utm_campaign=NL_20150609

Hey Guys, Rode my bike and hit a bunch of rain Yesterday. Washed it today to get it clean. Went to start it up and ride and now the Clutch makes a grinding noise pulling it in. Coming from inside the engine which I am guessing is clutch plates grinding. Anyone else with this problem. I did a...

Need some of advice on a DQS issue. Has anyone had issues with their quick shifter not working correctly on an intermittent basis. Seems to work initially on a ride then just stop working for some reason. I already had it back to the dealer once and they thought they knew what the fix was for it...

Anyone having an issue with the heat from the exhaust effecting the rear tire hugger on their 1299? With mine so far it is just creating a round shiny spot about 3-4 inches in diameter on the hugger just below the bend on the exhaust pipe.

Hi Had a weird starting issue today, and a little stumped at the moment. Haven't experienced anything similar earlier. Haven't seen anything similar on the forums either so trying a new thread. Been on the highway for 20mins or so, and pulled into a gas station to fill up, filled the tank...

Hey Guy's, I have some front end chatter - with the following charastics: - Midcorner - lean above 50 deg - far less at corner entry and/or on the brakes - disappear as soon i get on the throttle Relevant Bike setup (app 4000 kms old: Std swingarm Ohlins FGR fork - mountet in OEM...

Hey guys my brake light is stuck on. I've recently put on a fender kit and new Ducabike levers. I checked my rear plug and it's good. Manually pushed in both rear and front brake switches. Nothing will turn brake light off. Is it common for a switch to go bad?

Hi, I have a 2014 1199S it has about 2200 miles I bought it brand new few months ago, I only ride it mostly once a week commuting, my issue is that around 4500k to about 5300k rpm I get the feel of hesitation of the engine and it feels like the bike want to stall, it only happens around this...

So the triclore fell over in the drive way a few weeks back while it was idling. I've gotten the bent gear and clutch levers and broken handlebar replaced now, but I noticed tonight that there's clearly no full clutch disengagement on full lever pull back. I bled the slave and master for about...

Just thought I'd bring this up. I rode my bike about 600 miles in September until one day it wouldn't start. It sounded like a battery so I put my charger on it. Next day the bike started and ran fine. A week later/ same problem. I went and purchased a new battery and the bike still wouldn't...

Ok guys, I laid my 1199s down so it had to be repaired. No real mechanical damage but the tank was scratched. Last night we re-assembled the bike including putting the fuel tank back on. When I took it apart I didn't realize it was a quick connect for the fuel line. So I had unscrewed the...

Rode yesterday....290 miles..no issues... Today went for a shortish 100 mile ride..Right from the start something wasn't quite right... Pulled away from my garage and the bike kinda stumbled...like it was cold.... I thought Hmm..Odd never done that before but didn't think beyond...

Have a '12 1199 base, the clutch has started acting up, at times when u pull the lever it almost feels like it bound up. The clutch still works fine but feels like the rod is getting bound. It isn't seems to happen when the bike is hot and it intermittent. Anyone else have these issues?

Just curious if anyone has experienced a starting issue relating to 1st Gear starts, or other than neutral starts. My 2013 Panigale S, recently destroyed by a young driver not paying attention to her driving:mad:, was replaced with a 2014 Panigale R. These two bikes from what I can tell don't...

First post on this forum and I hope you guys can help me out. I have a 2013 Pani S that has been running rough and it was down on power. I took it to the dealership 3 different times and they fixed the issue each time but the problem came back. The first time they told me it was a kinked cable...

Bleeding my clutch. I'm no mechanic, but Ive done this several times before with no issue. Can't get any fluid through either the bleeder nipple at the slave or master. Any thoughts?

I just got done checking out the German forum and ran across an issue that I found on my bike as well...

Just installed a cnc slave cylinder today and ran into a couple issues just wanted to share how i solved them.Basic install straight forward no problems,but could not get slave cylinder to bleed out i filled the slave cylinder with brake fluid prior to install but could not get preassure in the...

hey guys owner of a 2013 1199s here i have the updated heatshield but it seems like the heat issue is getting worse for me since the weather is getting better here in vancouver and after install my R&G sliders on the ride home i didnt notice any heat however during the night ride, I...

Wanted to go riding today. First real trip after buying the bike back in december. Ended up taking the Yamaha :mad :mad: I fired the 1199 up, found the clutch feeling like no lube was in there, i could pull it in completely without any resistance at all. The bike had a last service 11months ago...