issue

I put TBOT's tail tidy on some time ago and all worked fine except the indicators are just not bright enough. The job replaced replacing the OEM tail with a pre-made one from tbot and a little wire splicing was all that was reqd. I've not got the NRC add on indicators and just fitted that...

Hello! I just received my brand new bike from the dealer and i have installed an oberon clutch slave today on my bike, the clutch system has been bleed perfectly (free of air) but i have a little issue with the engine running i'm not able to get into neutral the transmission is jumping from...

I have a 2012 1199 base with about 4,100 miles, and it will smoke very slightly on start up. However if I don't let it fully warm up before shutting it down, it will blow a lot of smoke the next time I start it. This will last a few seconds. It will also smoke if I blip the throttle before...

Hi All, I have an unusual electrical issue on my 2013 Pani R I have replaced the tail light with the Competition Werkes integrated light. Everything works but the brake light only blinks once when I hit the brakes. No matter how long i hold the brakes in, it only blinks once initially...

Hey guys, looking for some help on the disc brake rotor issue i noticed yesterday after taking the bike out for a ride.. when using the rear brake i started to feel like there may have been a little dirt, maybe sand got between the brake pad and the rotor and though it will grind itself out...

Upon riding today going to work and just going home my bike feels weird on 1st gear when I reached 7-8k rpm the bike feels like it's working harder and when I release throttle on 7-9k rpm the bike lags hard on that rpm and just takes a while to drop revs .... But it's a weird vibration going...

hi guys, i am having a big issue with my 1199s... i slip over from the seat a lot and also my gf in the passenger seat does not feel stable in the back further more when i corner it hard, knee down, i feel i am going to slip from the pedals too... i dont feel so comfortable to corner it...

New dealer installed TFT display.The rpms are displayed in yellow now just like when bike was in break in mode. power also feels off but that could be psychological. Anyone else with similiar issue.

Scenario: Rode the bike on Saturday to visit a new local Ducati dealer. On the way there, the clutch lever developed a strange feel, and sound. There was a fairly significant "grabbing or grinding" feel, which made the lever difficult to pull in. When off, you can hear a grinding sound on both...

I rode my bike into the dealer yesterday just to get the 600mi service warning light dismissed. I dropped it off for svc last week at 593 mi instead of 621mi. Whatever. When I got the bike back it would not start. Root cause: Panigales seem to not like starting in high humidity & high temp...

Downshift Problem My S has 8500 Kim's on it with very few problems. But today it started having downshift issues. When I attempt to downshift the lever and linkage and shaft all move as normal but not gear change. When this problem occurs and I'm in first the lever will still move as if you...

-- a buddy of mine (on his Aprilia RSV4), just had his Throttle Position Sensor (TPS) go full on - the motor rev'd up to redline (not sure what the rev limiter roll was) but it easily created a very dangerous situation......he managed it ok (pulled clutch in), and was able to stabilize it...

Thanks to Hawaiiduc for reminding about the Superstock 1000 Race from Assen. For those that haven't watched the 2013 STK 1000 season, the Panigale's have been consistently fighting at the front in STK 1000 vs. their mid-pack showing in SBK. These bikes are far closer to what is on showroom...

guys my right signal is not working I know some of u guys had this problem. my problem is I have the Lux Machine block off plates and was wondering will Ducati still fix this under warranty?

But I'm kind of looking forward to it! :D

For those interested in the 1199R I see the June issue of Sport Rider features a 7 page 'First Ride'. Haven't read it yet.

i just got a new 2013 1199 tricolore, when i first brought the bike home i got an E lock message on the display. i was unable to do anything with the bike at that point. the dealer came picked up the bike, told me it was a loose wire and it was fixed. it has since happened again. is anyone else...

Hello Everybody, just a question on the pressure of the rear tire. I usually ride at 36psi. On first service I told the dealer to check the rear tire because I've already had low pressure issues and they replaced the valve. Today I picked up the bike after 2 weeks and when I checked the...

Hi after the first day of ownership my 1199 when quick shifting from 4th to 5th and 5th to 6th slips between gears and over revs?? Am I doing something wrong.? Should I be applying more acceleration ??

How's this for another way around it? Would it be totally ridiculous to look into a replacement (after-market? / custom? ) radiator, with a thicker core and more thermal capacity AND a adjustment to the controller that turns the fan on ( in my case at least ) at 103 C. ? Maybe activating at ...