- Joined
- Apr 22, 2017
- Messages
- 40
- Location
- NC
Are u sure you are getting 30 volts AC at the stator leads unplugged, if the stator was shorted to ground, the voltage may be 3 or .3 volts AC, check your meter scale.
Mmmmm, but you did say you were getting 14 / 15 volts DC at the regulator output terminals, so that would indicate stator OK.
Recheck and advise.
Retired auto electrician.
That's the crazy thing and what I can't figure out. It's getting 29.9-30.0v on every yellow wire when measured across the pins (1-2, 2-3, 1-3), but when you measure resistance to ground from the same wires it's .3 ohms. How is that possible>