ABS and quick shifter issue

topolino · Apr 23, 2017

Place the QS body in between two pieces of soft wood in a vice. DO NOT overtighten the vice!! Just needs to be tight enough to stop the body of the QS turning, Then using a 12mm spanner unscrew the road from the QS body. You can use a hairdryer if you don't have a heat gun! Mine came off with little or no effort once heated. Also before you apply heat, remove the two screws holding the black micro-switch unit to the QS body and remove it. You really don't want to be frying the little electronic circuit inside.

Zelnik · Apr 23, 2017

Twistedracer said:
Pipe wrench noooo!!!

Hold the nut by the sensor body. Then turn by the flat on the shift rod towards you. Pipe wrench is for plumbing.

Works very good on tractors and ducatis.. Especially anniversarios and R's.

Twistedracer · Apr 24, 2017

Zelnik said:
Works very good on tractors and ducatis.. Especially anniversarios and R's.

You are very mean

Wasn't it Lamborghini that was the tractor company?

Zelnik · Apr 24, 2017

Haha..

Yes,but dont forget Fiat. I've done my fair share of hours ploughing snow on them but Massey Ferguson rules!
Anyway,Pramac rearsets is on now,looks good. If Topolino had written about frying the microswitch 1 day earlier i had taken it off.. But i feel i might get away with it,lets see.

Twistedracer · Apr 24, 2017

Zelnik said:
Haha.. Yes,but dont forget Fiat. I've done my fair share of hours ploughing snow on them but Massey Ferguson rules!
Anyway,Pramac rearsets is on now,looks good. If Topolino had written about frying the microswitch 1 day earlier i had taken it off.. But i feel i might get away with it,lets see.

Yes that was the first I read about the micro switch. Thankfully my heat gun has a directional nozzle so the heat applied exactly where I wanted it.

Zelnik · Apr 25, 2017

I like the look on these Pramacs.. Seen them here several times before and couldnt resist. I was lucky to get these second hand.

YoungR,the lowest threaded bolt sticking out,there you attatch the quickshifter for GpShift if i understand it correct. I have normal street configuration.

Glenn · Apr 27, 2017

Hey man my bike is doing the same thing. ABS warning flashing constantly, quick shifter not working, and the engine light always on. I haven't changed the rearsets so don't think it has anything to do with your rearset install. I've given it back to the dealer to fix under warranty.

JensNielsen · Jun 14, 2020

By chance that anyone has an update on this issue. I’m experiencing exactly the same type of issues/error on the ABS and that the DQS is not working (though not related to rear set change).

ABS and quick shifter issue

Help Support Ducati Forum:

topolino

Zelnik

Twistedracer

Zelnik

Twistedracer

Zelnik

Glenn

JensNielsen

Similar threads

Register CTA

Recent Discussions