Brembo RCS Clutch MC // Microswitch Elimination

endodoc said:

For me, that switch was a nightmare. I used the Factory Brembo switch that SimonKobe sell for the billet Brembo MC. For some reason when that switch is activated, things are weird for a bit afterwards so .... that stupid switch. I rigged the circuit to the horn button on the Ducabike multi switch unit. Now if I do kill it, instead of trying to find N, I just hit the horn switch with the starter. Works perfect and I don't have to engage that switch circuit unless absolutely necessary.

Click to expand...

that is very interesting that there was an issue. I would think maybe there was an issue because of aftermarket switch (sending weird signal)? I believe OEM switch will be fine. I mean you press on the lever, metal tap on pressed button, it to send signal...

Well logic would tell you that your assumption is accurate just didnt seem so in my case. Activating that circuit via normal clutch operation did some weird mojo to the fueling long after the switch was disengaged. That dog pile of a Mits ECU already has a hard enough time struggling with its logic section. I don't need to give it any more to do.

endodoc said:

Well logic would tell you that your assumption is accurate just didnt seem so in my case. Activating that circuit via normal clutch operation did some weird mojo to the fueling long after the switch was disengaged. That dog pile of a Mits ECU already has a hard enough time struggling with its logic section. I don't need to give it any more to do.

Click to expand...

i hate it when things dont make sense.

Yeah it's all for the same reasons why I did all this I knew if I removed the switch or tried by passing it would have ran into all kinds of issues. I had the switch zip tied out of the way for a while was always fine with starting in neutral so just didn't want it dangling around anymore.



QUOTE=youngR;286952]that is very interesting that there was an issue. I would think maybe there was an issue because of aftermarket switch (sending weird signal)? I believe OEM switch will be fine. I mean you press on the lever, metal tap on pressed button, it to send signal...[/QUOTE]