Panigale Make Over

Ducati Forum

Help Support Ducati Forum:

double0 said:
Money is clearly no object.

Wanna adopt a 37yr old?
Click to expand...


Hahaha.....Trust me I had to sell a few things to do this and I dont own a car, 3 kids begging for me already......Let me see a 4th one, yeah that could work :D
 
Last edited:
Nano Formula

After testing many samples from different companies, I have decided to go with Nano Formula Nanoformula.com | Nano Ceramic Protect 9H ? Twarde Ceramiczne Pow?oki Ochronne. Najskuteczniejszy system zabezpieczaj?cy lakier, tapicerk?, felgi, plastiki, gum?, szyby i dachy cabrio.

Their service was excellent and the product proved to be outstanding.

I will be treating the whole bike with this, including sprockets as it made the chain lube just wash off.
The paint work when treated just stood out and gave it a depth of gloss that would take many coats of clear to get the same effect and proved to have an exceptional hardness when a double coat was applied.
I think it would even prevent stone chips if multiple coats were to be applied, just have to wait and see.
 

Attachments

  • Nano Ceramics.jpg
    Nano Ceramics.jpg
    80 KB
JonT said:
Pics when done please mate.
Click to expand...


No Worries and I am sure we will catch up at sometime seeing you are just up the road.

Once the bike gets here I just have to strip it all down and put everything on and then Ill be out and about :D
 
Wallaroo said:
No Worries and I am sure we will catch up at sometime seeing you are just up the road.

Once the bike gets here I just have to strip it all down and put everything on and then Ill be out and about :D
Click to expand...

Sounds good mate, I am avoiding riding on the weekends at the moment, the police are blitzing in the hinterland, all the people whining about the proposed TT race have been hammering the police hotline about supposed street racing going on, I live on the track and haven't noticed any increase, they're just trying to get the race canned before it gets off the ground. The last two weekends they have been stopping every rider for noise tests and if you have an after market exhaust like an Akra or Termi system then you need to have a sticker on it that shows the complience to the standard, 94 db is what the legal limit is. I have taken out the db killers like most so I am not risking the fine and leaving the bike in the garage. Sort of sucks that the whinging minority can have that effect on policing, most people I have spoken to are supporting the race.
 
They have also been in unmarked cars driving slowly through the twisty sections, welll under the speed limit and then booking riders that overtake them on the double lines, some very quenstionable policing tactics there.
 
JonT said:
Sounds good mate, I am avoiding riding on the weekends at the moment, the police are blitzing in the hinterland, all the people whining about the proposed TT race have been hammering the police hotline about supposed street racing going on, I live on the track and haven't noticed any increase, they're just trying to get the race canned before it gets off the ground. The last two weekends they have been stopping every rider for noise tests and if you have an after market exhaust like an Akra or Termi system then you need to have a sticker on it that shows the complience to the standard, 94 db is what the legal limit is. I have taken out the db killers like most so I am not risking the fine and leaving the bike in the garage. Sort of sucks that the whinging minority can have that effect on policing, most people I have spoken to are supporting the race.
Click to expand...

I used to live right on the first WRC course and people put rocks on the roads, so it was moved to Coff's, where it was welcomed with open arms.
I guess that is what could happen on the TT course as well.
Always those few who dont see the big picture and want everything their own way and the stupid thing is they get it.

I can see i will regret moving from my nice quiet country road up to here, but being close to family is way more important.

The DB killers are always first to go:D

JonT said:
They have also been in unmarked cars driving slowly through the twisty sections, welll under the speed limit and then booking riders that overtake them on the double lines, some very quenstionable policing tactics there.
Click to expand...

The other day I was heading towards Brisbane and i counted 15 cops on Bikes, Patrol cars and unmark cars mostly around Narangba.....blitzing everywhere, must short on cash:D
 
More parts

Today most of the order from BellissiMoto arrived and all i can say is wow !!
Actually I can say more and that is a huge thanks to Lyle and Randy, especially Lyle who had to put up with my endless barrage of questions and emails.

Seriously guy's if you ever need parts, these are the people to look after you.

I know Gunny speaks highly of them and I understand why.
This is my second time getting gear through them and again it is first class.

I am glad i have decided to do alot of the bike with CNC, so far everything I have here is awesome and the Ti flange hub and rear wheel nuts have me drooling......where is that damn Anniversario !!

Ok couple of pics Parts and flange.
 

Attachments

  • Parts.jpg
    Parts.jpg
    82.2 KB
  • CNC Ti Flange.jpg
    CNC Ti Flange.jpg
    78.5 KB
it was a long night last night Ceramic coating some of the parts, lucky i had MotoGp to get me through it.

First time I have ever used this ceramic coating and I am impressed, if it lasts for 5 yrs like they say using a double coating it will be great.
This is all just a prelude to doing the bike, need the practice to get it right.

Anyway few pics of the mess.
 

Attachments

  • rear sets.jpg
    rear sets.jpg
    91.3 KB
  • long night.jpg
    long night.jpg
    84.4 KB
  • next morning.jpg
    next morning.jpg
    82.1 KB
This sprocket and carrier has had 4 coats of Ceramic 9H hard and 1 coat of Ceramic soft protect.

Parts are Titanium flange, Ti wheel nut, Sprocet carrier and sprocket by CNC and Ti cush drive and nuts by AEM.
 

Attachments

  • 2006-01-02 14.03.59.jpg
    2006-01-02 14.03.59.jpg
    88.8 KB
Wallaroo said:
This sprocket and carrier has had 4 coats of Ceramic 9H hard and 1 coat of Ceramic soft protect.

Parts are Titanium flange, Ti wheel nut, Sprocet carrier and sprocket by CNC and Ti cush drive and nuts by AEM.
Click to expand...

mate,
CNC also sell some really nice Ti sprocket nuts but the urethane cush drive threads are different
1.0 vs 1.25 cannot remember which way now, but anyway I rethreaded and all good

It looks like you do not have them but thought I would warn you in case you get them. They do look nice
 
bradp51 said:
mate,
CNC also sell some really nice Ti sprocket nuts but the urethane cush drive threads are different
1.0 vs 1.25 cannot remember which way now, but anyway I rethreaded and all good

It looks like you do not have them but thought I would warn you in case you get them. They do look nice
Click to expand...

Yeah I know, also Moto Corse has some nice ones , but the Ti nuts come with the AEM cush drives anyway and they are pretty nice.

Got the Zero Gravity double bubble screen as well and put a few coats of ceramic coating on it, water doesnt even stay on it.
 

Attachments

  • 2006-01-01 21.12.00.jpg
    2006-01-01 21.12.00.jpg
    93.2 KB
Finally got all the other parts coated, including the Ti clip on's from NCR that were originally for the 1199.
The rear sets went a richer red after the coatings, cant wait to see them on the bike.

Final shipment from Bellisimoto is on it's way.....cant wait, it is always like having a Birthday when bike parts arrive.
 

Attachments

  • 2006-01-01 20.52.31.jpg
    2006-01-01 20.52.31.jpg
    99.5 KB
  • 2006-01-01 20.53.18.jpg
    2006-01-01 20.53.18.jpg
    95.5 KB
Good to see you at it again. Can't wait for you to recieve your Anniversario and see it all come together.
 
Twistedracer said:
Good to see you at it again. Can't wait for you to recieve your Anniversario and see it all come together.
Click to expand...

That makes 2 of us.....Bikes have just arrived today in Australia, but my is not there yet. Probably a good thing because there is still some stuff coming from Corse Design and the carbon from Fullsix is not here.

Will still take me awhile to strip the bike down and add everything,so i am hoping by the end of October it will be finished and it will take longer if I ride all the time:D
 
Oh yeah this was fun. :D

Really nice Rear Sets
 

Attachments

  • 2016-09-11 09.55.27.jpg
    2016-09-11 09.55.27.jpg
    95.9 KB
  • 2016-09-11 12.31.27.jpg
    2016-09-11 12.31.27.jpg
    99.5 KB
Twistedracer said:
Lots of screws in that kit. Nice setup though. Do those pegs swivel or are they fixed?
Click to expand...

All of the pegs are folding.

Your right these are a awesome set up, I had Lighttech on my 1199, but I think these a just a little bit better.
Have to put them on the bike first to get a really good comparison.
 

Similar threads

Arsey
For Sale BST RapidTEK wheels for Ducati Panigale, Streetfighter, Multistrada, Braketech CMCs
Replies
2
Views
378
BP PanigaleV4S
BP PanigaleV4S
V
STM Clutch plates and Basket Replacement Interval for 2023 Panigale v4r
2
Replies
22
Views
2K
899
8
ManAndMachine
  • Locked
SOLD! 2020 Panigale V2 For Sale Full Akra BST Ohlins FKR TTX plus more...
Replies
1
Views
650
ManAndMachine
ManAndMachine
Vicati
For Sale Panigale 1299s and Panigale 959 Full bolt ons
Replies
11
Views
505
Vicati
Vicati
S
For Sale 23 v4s fairings and other take offs
Replies
17
Views
451
SirJAG
S

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top