Termignoni Titanium 4 USCITE Full Exhaust Install on Panigale V4S (help)

Joined Oct 2018
2 Posts | 0+
Santa Cruz, CA
:(
I got the Termignoni full titanium exhaust kit for the V4. Even though the Termignoni website suggests that the install instructions are bi-lingual, starting on page 7, the instructions are all Italian.

Ok, I used Google Translate to make my own querky set of English instructions.

Well, I got it all done (with a lot of help) and I even got the UPMAP mapping installed into the bike.

I then turn on the bike and press the starter switch, and the stating motor works, I do smell gas going thru the system, but the bike doesn't catch. All the ..... lights do not show a fault.

If anyone can help .... please
 
Termignoni D182 Installation Instructions

Not heard of any issues like that after the install.

Do you want to check the installation instructions ( attached ), hopefully a better english just to make sure the setup has been followed.

Regards

Jay
 

Attachments

  • Termignoni D182 English Part 1.pdf
    435.5 KB
  • Termignoni D182 English Part 2.pdf
    498.7 KB
My Termi slip-ons w/ UPMAP didn't have any issues regarding starting the bike. I'm assuming there's no difference between the full system and the slip-on in regards to the bike being able to start (unless you had to disconnect some wiring that I didn't...in which case maybe something didn't get reconnected?).

If everything is connected properly I'd say your first step should be to re-flash the computer back to stock (I saw that option in the UPMAP app on my phone), then attempt to start the bike. If the bike starts up, you know the UPMAP program glitched. Next, reinstall the UPMAP and try starting again. Either the file is corrupt or it didn't load properly. If the bike runs on stock programming, and not with UPMAP, it failed during installation or the actual file is toast and you'll need to download the mapping again.

Just guessing.