brake

Hi All, I have an unusual electrical issue on my 2013 Pani R I have replaced the tail light with the Competition Werkes integrated light. Everything works but the brake light only blinks once when I hit the brakes. No matter how long i hold the brakes in, it only blinks once initially...

Hey guys, looking for some help on the disc brake rotor issue i noticed yesterday after taking the bike out for a ride.. when using the rear brake i started to feel like there may have been a little dirt, maybe sand got between the brake pad and the rotor and though it will grind itself out...

what brand do you use? chlorinated or not chlorinated? whats the difference thanks in advance

I have about 1 mm left in the front... I like it when they bite and don't cost me an arm and a leg. Not so much into cheapbay either. Thanx!!!

Just installed a set of these high quality Carbon Levers. Really happy with the outcome. Thank You Randy at BelissiMoto for the excellent service and great products.

Was talking to another member and I gave in and will be adding my rear brake pressure switch. Why not right? This is my custom cable I made for the rear brake using the banjo fitting and original cable.

just had some more " warranty " work done, new engine casing, new rocker casket, plus gearing change and new map ( AWESOME difference ) ! and was told the front pads need replacing ! sure done 5k accept that.... these guys are good and have steered me right so far but was a little surprised by...

While riding yesterday i noticed a thin stripe of dirt on the right upside of my steering damper. After further inspection i noticed the hoseclamp underneath the brakefluid-reservoir was pointing downwards, slightly touching the steering damper when putting the steer in maximum angle. This was...

So I didn't get a clear answer so here is one. When prepping the 1199 (any version) for track use if you remove the fuse for the brakes OR unplug the rear brake light you will get a warning on the dash. So I took a 100 Ohm, 10 watt resistor and plugged it into the rear brake light switch...

Can someone please provide a write up on brake and gear pedal adjustment on a R ?

So I recently went to do a service at my dealership and had them double check my brake pads which I thought had very little life left, sadly turns out am right :(. I have only 7k miles on my bike with a couple of track days and several mountain runs. So now the question is do I fork out 100 a...

Had my bike back for a couple days from the shop now and have been too lazy to post this until now. Got home from the shop to find black .... all over my bars and tank. I can see oily .... running down the brake fluid reservoir.... Should I just pull the top two screws off and see if that...

Went to install the rizoma next fluid receivers on my 1199 yesterday. As I pulled the OEM front brake reservoir off I noticed the hose had been chaffing and was almost at a point of rupturing the brake line. Recommend everybody inspect the front brake line to the reservoir. The next receivers...

I don't recall anyone posting any specifics on if they've done this or what their thoughts were? I tend to feel the OE lever feels spongy IMO. I've bled them many times, not super satisfied. Thanks guys!

Your rear brake shouldn't require bleeding very often, but when it does get flaccid, here's your ticket to Viagra-pedal rigidity: On the left side of the bike under the swingarm you'll find the rear caliper. 1) Cut off the two zip ties holding the ABS line and the Brake line together, taking...

Delete--dupe post.

Unless you have scientific instruments to measure it, fluid is not compressible. The lever in your right hand on a motorbike and the pedal in the middle (you do drive a stick, right?) of a car press on brake fluid, which basically acts as a solid that's able to curve and twist its way down to a...

all good please delete

I know there are other good threads for tires but none really spell out exactly the options and pros/cons. I'm a rookie track day rider and am fixing to burn through my first set of tires. The supercorsas are great to me as I don't have much to compare them too but I'd like to switch them out...

Can someone post a picture or tell me where the front brake lever sensor runs on the right side of the bike? I found the rear brake sensor switch. I swapped over to race fairings and the stop light errors display on the dash which I understand. What I also don't get is why I get the ENGINE...