brake

Hey All, Was wondering if anyone has used Galfer or Spiegler steel braided brake lines on the 1199/1299 or SL? And if so did you notice a difference on the track? Or any other brand. Thanks in advance..

It appears I lost the little screw that holds the rear brake's fluid reservoir to the little black plastic bracket during my last track weekend. Does anybody know the specs (thread, size) of the little screw? I am sure I could order one from the dealer; however, it would be faster and likely...

I have a 2015 Pani 1299 with 4800 Km Sometimes when i brake middle strong at a traffic light, it beginns to make loud noises and the front fork vibrates with 500 Hz. All people look at me in that moment. This phenomen comes and goes unpredictable Have you seen something similiar yet?

Hi anyone had trouble with front brake discs? one disc is eating itself around bobbins both discs bobbins are free, crap!

I had a woodcraft bar end and front brake guard on my 1098, came close to needing once at a track day. Looking for recommendations that will fit the 1299 with the screw in bar ends. Thanks

Does anyone know how much free play I need for the master cylinder to release the pressure? I want to adjust mine after I've adjusted the lever position on my new rearsets (Gia Moto) so it's as tight as possible while still being safe

Anyone else had this happen? My rear brakes seized today, even caught fire :( Been away for a month. First ride when I got home, my rear brake clamped on and poured smoke. When I stopped, it almost instantly caught fire with a pop sound and burnt until either the caliper piston seals or the...

So before I go back to my dealer with what I personally think is a fault with my rear brake I wanted to ask everyone who reads this thread about the behaviour of the ABS and the rear brake. I am currently going through the break in period for my 1299S and I know a lot of people do not use the...

this has come up recently. so attached is a link that is sort-able by brand qty wet or dry boiling point with some useful information. https://www.lelandwest.com/brake-fluid-comparison-chart.cfm?startRow=1&SF=8&ST=2

How often do people have to change the brake fluid in the rear bake system? Mine is getting dark awefully fast..

If anyone has the CRG Carbon brake lever installed on their Panigale (should be same as 1098 series), would you mind measuring the distance when you have a free minute, please? :) pic for reference

Selling Diavel side mirrors, brake covers and suspension adjust knob. Make an offer as long as its reasonable. Low ball and you get "Lol" as a response. Thanks for looking.

While digging around on the web for alternative brake components for the Panigale I became pretty insecure about the availability of the SL's MC: Brembo 19.21 MCS. Does somebody of you specialists know whether this MC is still in production, or was it just made for the SL (that would be crazy...

Dear gents I'm thinking of replacing the brake calipers on my 1199 that shall "slowly" be converted into a track bike. I'm happy with the OEMs M40, but one of them is pretty scratched. I think kope made some expiriences with aftermarket products in 2013. Lot of things changed since then I...

Hey Guys, Went for a long ride yesterday and noticed that the lid of the brake master cylinder is leaking. A drip went on to the dash and has marked the plastic. It all seems tight, but it still leaks. Has anyone else had this issue and would I be right to try and make a warranty claim for...

I'm looking at the fren tubo kit. Anyone have experience with these lines or any others when deleting the abs

I took the 1299 out for a test yesterday, and amongst the things I noticed was the power of the front brake. I use standard levers on my 1199, but the brakes definitely felt more powerful on the 1299. Have mine suffered fade or what's going on, think they are still M50 calipers from what I've...

**SOLD...LighTech Magnesium brake Lever LighTech magnesium brake lever for 1199 Panigale OE brake master cylinder Straight, vented, folding Lever Brake lever ONLY PN LighTech LEVD010J Black I installed on my bike new, then removed after ~100miles as I switched to a different front master...

Hey guys my brake light is stuck on. I've recently put on a fender kit and new Ducabike levers. I checked my rear plug and it's good. Manually pushed in both rear and front brake switches. Nothing will turn brake light off. Is it common for a switch to go bad?

Figured I'd see if anyone had one for sale before I go order it from my work. Open to all brands if you have one :D