I just got rid of throttle slop!

Ducati Forum

Help Support Ducati Forum:

I just put in the kit being sold on eBay. Two simple pieces, works brilliantly. Install time was about 5 minutes.

My redneck engineering solution worked, but that plastic piece I wedged in there could have eventually come loose at anytime.
 
kismetcapitan said:
I just put in the kit being sold on eBay. Two simple pieces, works brilliantly. Install time was about 5 minutes.

My redneck engineering solution worked, but that plastic piece I wedged in there could have eventually come loose at anytime.
Click to expand...


Smart move
 
Each ABS 3D printed part must be hand-trimmed and sanded out to exact dims or you will have issues.

Can control how much "Play" by either using just one plastic part, or sanding off the sides to adjust to personal preference. Awesome, but Extremely time consuming to produce a set that is perfect.

 
Ok, sounds like everyone is in and doing it so I better jump on the wagon too. And if PA is in then you know it's good... Is there more availible and who gets my money? :D
 
OK - 10 sets are spoken for with my friends so this leaves ~ 10 sets for forum members, since this is extremely time consuming to do right. First-come first served.

Paypal [email protected] $20 (as gift) or 3% paypal fee (I think). MAKE SURE TO NOTE YOUR CONFIRMED SHIPPING ADDRESS.

I really don't want to produce any more units, but I guess upto 20 sets max. First come first served.

Priority given to these folks who said "I'M IN":
Prince Albert
80 shilling
ChicagoSammo
slowjamz
fzr100098
Marmoot x3
DEDuc1299S
Gecko
Steveo
toomanbmw1
sergio1199Panigale
flobrandx
b9009b

By agreeing to purchase, you are making note that you understand the below:

This throttle spacer kit is intended for racing only. Installation of this kit will result in an extremely responsive throttle and some may find difficult to control. Only racers and experienced riders looking for instant throttle response should install this kit. Installation, especially improper installation of this kit may lead to unexpected throttle behavior, including but not limited to stuck throttle, which may result in a crash.

Fits Ducati Panigale 899/1199/1299.
 
Last edited:
Payment sent. I'll send PM with address. Thanks for providing this awesome product to us forum members!
 
jamesz3 said:
OK - 10 sets are spoken for with my friends so this leaves ~ 10 sets for forum members, since this is extremely time consuming to do right. First-come first served.

Paypal [email protected] $20 (as gift) or 3% paypal fee (I think).

I really don't want to produce any more units, but I guess upto 20 sets max. First come first served.

Priority given to these folks who said "I'M IN":
Prince Albert
80 shilling
ChicagoSammo
slowjamz
fzr100098
Marmoot x3
DEDuc1299S
Gecko
Steveo
toomanbmw1
sergio1199Panigale
flobrandx
b9009b

By agreeing to purchase, you are making note that you understand the below:

This throttle spacer kit is intended for racing only. Installation of this kit will result in an extremely responsive throttle and some may find difficult to control. Only racers and experienced riders looking for instant throttle response should install this kit. Installation, especially improper installation of this kit may lead to unexpected throttle behavior, including but not limited to stuck throttle, which may result in a crash.

Fits Ducati Panigale 899/1199/1299.
Click to expand...
You should have my money in your PayPal account as of a few minutes ago.

Cheers and thanks for coming up with this idea for the Forum.
 
jamesz3 said:
This is a MUST for Track or Racing. Stock slop is awful at the track.

I'm having my engineer 3D Print a batch for me and a few friends in ABS.

Who wants a set for $20?

We will be printing a batch and can ship by mid next-week.
Click to expand...

I'd definitely be in for one of these please!!
 
Well 3D printing is the easy part.
Each set must be cut to exact size and each set must be form-fit tested on the actual throttle mechanism before shipping out. Glad I'm not the one doing it. lol

I've received Paypal payment from 7 members here so not too many sets left.


 
Last edited:
What brand of printer is it?

Material is abs?
 

Similar threads

Eenybear
A note on throttle spacers
2 3 4
Replies
74
Views
18K
Paul G
Paul G

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top