- Joined
- Sep 29, 2019
- Messages
- 2,045
- Location
- London
It's not bad, about £2k. And, much better user interface.
LAP timers
- Thread starter Steven31371
- Start date
Help Support Ducati Forum:
It's not bad, about £2k. And, much better user interface.
Aim solo D2L.
It’s 100% plug and play, you can add 2 cameras and the software has built in data overlays for the video.
It takes all of the data from the canbus. You get speed, temp, brake pressure, twist grip opening, traction control, gear, etc. All of which can be overlaid onto the video feed if you use the Aim camera.
It’s 100% plug and play, you can add 2 cameras and the software has built in data overlays for the video.
It takes all of the data from the canbus. You get speed, temp, brake pressure, twist grip opening, traction control, gear, etc. All of which can be overlaid onto the video feed if you use the Aim camera.
- Joined
- Jul 10, 2020
- Messages
- 6,075
- Location
- Midwest
They are pretty proud of their cameras. Have you made a video with the overlay you can share?
- Joined
- May 1, 2021
- Messages
- 3,089
- Location
- SoCal
Looks very straightforward and easy to me.
Thanks for giving me some direction to look in guys ;-)
- Joined
- Dec 13, 2018
- Messages
- 427
- Location
- Upstate New York
Using the AIM Solo2 DL and Smartycam…..Pulls the ECU data and does an overlay based on your uploaded layout, fairly easy to set up but agree with Karl that this .... should be 1/2 the size if it was designed by Apple.
Mounting of both modules was limited on the V4 so attached to my battery cover right now, easy to grab the SD card though for the video.
The new version is supposed to be coming out with more FPS and better resolution, but due to the ongoing supply chain issues god knows when they will actually show up.
- Joined
- Jul 10, 2020
- Messages
- 6,075
- Location
- Midwest
Damn that thing is huge. I suppose that’s one thing the DDA and GPS has going for it. It’s all meant to fit under the fairings.
- Joined
- Oct 25, 2020
- Messages
- 1,610
- Location
- Lusail
Looking at the different options they offer, I think that only the bullet cameras require that controller and the Smartycam 3 doesn’t.
I’ll confirm this with AIM as I asked them yesterday about the possibility of logging suspension travel using the Solo with potentiometers. The answer was that it can’t.
AIM suggested the MXM dash logger if I want to do that but then there’s other options as well… the EVO4S which I’ve been eyeing for a while.
I’ll confirm this with AIM as I asked them yesterday about the possibility of logging suspension travel using the Solo with potentiometers. The answer was that it can’t.
AIM suggested the MXM dash logger if I want to do that but then there’s other options as well… the EVO4S which I’ve been eyeing for a while.
- Joined
- May 1, 2021
- Messages
- 3,089
- Location
- SoCal
The guys who work on my bike are saying EVO4S if I want real datalogging along with the other stuff I want.
I’m gunna remove my headlights and tail lights, hopefully that will free up some space and with a bracket we fab maybe fit it to the front fairing stay somehow
- Joined
- Oct 25, 2020
- Messages
- 1,610
- Location
- Lusail
It’s a good option no doubt.
The question is where to put it. I’ve thought about using a bracket and mounting it under the rear subframe using the passenger foot peg holes. Or, finding a smaller battery and maybe then there’ll be some space under the battery cover but that’s a stretch.
- Joined
- Dec 13, 2018
- Messages
- 427
- Location
- Upstate New York
Bullet cam location, and totally agree about the size and location of my controller. BSD mount for the AIM unit to offset the location a bit for cable clearance.
Agree DDA is cleaner, but my experience with a full DDA+ setup on my '15R was that it sucked. Often would not pickup start/finish if your line deviated (i.e. passing someone on a straight) and the overlay of the DDA file export over video was basically an exercise in frustration. The output of this format is very simple, you can design an overlay to include whatever you want (track map, lean angle, brake pressure.....and talk to DeussenEngine for more capabilities). Auto start/stop when the bike is rolling is nice too, never have to remember to start smacking some buttons in the pits.
Agree DDA is cleaner, but my experience with a full DDA+ setup on my '15R was that it sucked. Often would not pickup start/finish if your line deviated (i.e. passing someone on a straight) and the overlay of the DDA file export over video was basically an exercise in frustration. The output of this format is very simple, you can design an overlay to include whatever you want (track map, lean angle, brake pressure.....and talk to DeussenEngine for more capabilities). Auto start/stop when the bike is rolling is nice too, never have to remember to start smacking some buttons in the pits.
- Joined
- Oct 25, 2020
- Messages
- 1,610
- Location
- Lusail
Thanks for the info... I'll be in touch with @DeussenEngines for a proper setup.
- Joined
- Jul 10, 2020
- Messages
- 6,075
- Location
- Midwest
At some point you need the WSBK style tank to hide all the data loggers and controllers near where the batter normally fit.
That camera mount location looks pretty trick.
The smartycam 3 looks like a rugged GoPro. Can you overlay the logged data from a GoPro in Race Studio or whatever AiM calls their software? The Smartycam 3 looks appealing, but its rather expensive for a 1080p 30 FPS camera.
They lost me on this part for sure...
That camera mount location looks pretty trick.
The smartycam 3 looks like a rugged GoPro. Can you overlay the logged data from a GoPro in Race Studio or whatever AiM calls their software? The Smartycam 3 looks appealing, but its rather expensive for a 1080p 30 FPS camera.
They lost me on this part for sure...
Last edited:
- Joined
- Jul 22, 2020
- Messages
- 2,138
- Location
- texas
So it records no audio at all?
- Joined
- Oct 25, 2020
- Messages
- 1,610
- Location
- Lusail
Yeah that's strange... they list harnesses with mic jacks for the 2.1 and 2.2 Smartycams but not the 3.
I'll also ask about this.
- Joined
- May 1, 2021
- Messages
- 3,089
- Location
- SoCal
That’s a shame, the best vids are where the rider is mic’d up
Although on mine you’d just hear a bunch of me cursing at myself followed by very lady like screams of panic while I try to hold on.
- Joined
- Jul 10, 2020
- Messages
- 6,075
- Location
- Midwest
Apparently not. I doubt the Solo has a mic port but I haven't looked into it.
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
