New Billet Tail tidy and Mirror block offs with integrated turn signals

Ducati Forum

Help Support Ducati Forum:

Sorry for the troubles. It sounds as though there's an issue with the tail tidy electronics. I would be happy to rebuild the tail tidy with the improved turnsignal circuit boards and wireharnes. I'll email you a return label If you are interested in it being rebuilt. All I need is your order number or email address to look up your order.
Kyle

Jayock said:
Having an issue with mine. Got the mirror block offs and the tail tidy. Not sure if it's always been an issue, and I just noticed it, or if it's a new issue. Only had it installed about a month. Wondering if anyone else is seeing this. It doesn't seem to be an inherently issue with the tail tidy, but how the bike accepts it.

Left turn signal works exactly as expected, both on the mirror block offs and the tail tidy.

Right turn signal does two flashes on both front and back. Then it goes to a faster flash rate, and only flashes on the mirror block off, stops on the tail tidy. So the mirror block offs keep going forever, but switch from slow to fast after two flashes. The tail tidy does two flashes then stops flashing until I cancel the turn signal and turn it back on, then two flashes again and stop again.

I saw the right working when I installed, but can't say I watched it go longer than two cycles. So maybe always been an issue? I can't say. Just had a riding buddy point it out to me last week, and it seems to be consistent now.

Any help greatly appreciated.
Click to expand...
 
Hey OP. I emailed you about my order a couple of times but never received any reply. I ordered two months ago and just wondered where I am in line. I understand it’s a low volume, long lead time situation but I’m over the six weeks and in the dark. Please shoot me a PM if you see this.

Thanks!
 
djm said:
Hey OP. I emailed you about my order a couple of times but never received any reply. I ordered two months ago and just wondered where I am in line. I understand it's a low volume, long lead time situation but I'm over the six weeks and in the dark. Please shoot me a PM if you see this.

Thanks!
Click to expand...

I sorry for the delay and I'm sorry I can't respond to every email it's just me here and I have to triage emails so I dont spend too much time. I promise your order has not been forgotten or lost you will receive an email the moment it ships out.

If I spend too much time on email I don't sleep enough. My CNC and I are averaging 100hr work weeks and I take about 1 day off a month. I Just took a week and a half off after a year and a half of that work pace. That time off didn't help the email backlog. There is just not enough of me to answer all of them.
The good news is there has been a big shift in production capacity, and my order backlog should be clear in the next 2 weeks, while also eliminating shipping lead time in the future. I have also been working quality and design improvements to make sure everything is as robust as possible.

You just gotta bear with me I'm trying then best I can and still learning as I go. I can promise the parts are worth the wait.
 
Ther1kid said:
I sorry for the delay and I'm sorry I can't respond to every email it's just me here and I have to triage emails so I dont spend too much time. I promise your order has not been forgotten or lost you will receive an email the moment it ships out.

If I spend too much time on email I don't sleep enough. My CNC and I are averaging 100hr work weeks and I take about 1 day off a month. I Just took a week and a half off after a year and a half of that work pace. That time off didn't help the email backlog. There is just not enough of me to answer all of them.
The good news is there has been a big shift in production capacity, and my order backlog should be clear in the next 2 weeks, while also eliminating shipping lead time in the future. I have also been working quality and design improvements to make sure everything is as robust as possible.

You just gotta bear with me I'm trying then best I can and still learning as I go. I can promise the parts are worth the wait.
Click to expand...

I know I know. I was just curious where I was in line because it was longer than quoted lead time. I'm getting fed up looking at the diving board hanging off the back of my beautiful v4.

Take it easy man.
 
I have the mirror block offs and the tail tidy. I can testify they are AWESOME and so is the guy who is making them.
 
Can vouch for the finished product! Very pleased [emoji1419]
386bcebf855ea49f5565a00a85c14c49.jpg
80413fa87085cc7908362e6e42a41d83.jpg
a2081fff6c231cc3fa72c2064574c05d.jpg
afc4c997106a9b3718fad2edafc35db7.jpg


Sent from my SM-G892A using Tapatalk
 
I just received my tail tidy, it’s easily worth twice the price of the NRC part.

It’s really a very nicely designed and well manufactured product
 
Ther1kid said:
...My CNC and I are averaging 100hr work weeks and I take about 1 day off a month. ...
The good news is there has been a big shift in production capacity, and my order backlog should be clear in the next 2 weeks, while also eliminating shipping lead time in the future.
I have also been working quality and design improvements to make sure everything is as robust as possible.
Click to expand...

Was well worth the wait they look and work great!
Big tx Kyle for your craftmanship, comms and service.

The result (click for movie):
 
Last edited:
Ther1kid said:
Making some moves on the production side of things to free me up from running production and assembly 100% of my time. Doing 80% product development and 20% production is the goal. With the increased free time I can develop new product lines Including the 1299/959. It will be a slow transition to doing mainly product development, but by mid/late summer I'll be there.
Click to expand...

I remember seeing this a long time ago and it kind of fell off my radar while waiting. Did you ever produce a tail tidy and/or mirror blockoffs for the 1299? I am currently using NRC for both and don't really like the look.
 
Last edited:
Just some feedback. I ordered both front mirror block offs and the tail tidy 6 months or so ago. They were great, suddenly one of my signal lights on the tail tidy stopped functioning. I emailed the owner, he said to send it in, had it back within the week, he reworked all the internal electronics. Super customer support and no questions asked fixes with timely turnaround. Fantastic company, fantastic product, go out of your way to support this guy!
 
Inadeje said:
very interested for the rear of my upcoming SF4S
Click to expand...

actually I love the way the NRC integrates and tucks up under the tail, just disappointed the front turn signal/mirror block off bolts rusted within a week after installing

“tucked” is the way to go unless you prefer tagless
 
RdashP said:
czy0Qifh.jpg
Click to expand...

those are sweet. I ordered front/rear a few weeks ago. hopefully he'll catch up on his backlog soon. i've had NRCs in the past (899, currently on the rear of a 2017 hypermotard sp). they're fine, but this really looks like the good stuff. ain't cheap but i'm willing to pay for what everyone is saying is top quality.
 

Similar threads

P
For Sale 2018 Ducati Panigale 959 Corse
Replies
1
Views
30
pampalini23
P
M
Want To Buy V4 OEM Take-Off Parts Wheels, Exhaust, rearsets, tank cover, bar ends, tail light/fender/plate holder, mirrors and winglets
Replies
5
Views
464
mhaddad
mhaddad
F
For Sale NRC Panigale V2/V4 Mirror Block Off Turn Signals
Replies
0
Views
290
frank.m2
F
M
Mods to my 2023 Streetfighter V4S
Replies
4
Views
2K
Mehaffydr
M
G
Want To Buy Panigale 1199 mirror block-offs with turn signals-and CRG LS bar-end mirrors
Replies
4
Views
360
greggiacona
G

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top