RedLine Under Tail Exhaust

Ducati Forum

Help Support Ducati Forum:

R

rpm429

Joined
Sep 24, 2013
Messages
134
Location
Orlando
I figured I'd start a thread here just for the RedLine Exhaust since an offshoot discussion started in the AR under tail thread, and redline fits 1299 and 1199.

I ordered this https://www.redline-moto.com/. It is expected to be delivered in November.

I will try to get a before and after dyno runs on the same dyno, with similar weather conditions. I currently have the Full Termi tuned with tuneboy version 6.

I almost went for the Termi undertail but I think it is a bit close to the rear bodywork for my liking, and it's ~3300USD without import tax for stainless headers. Redline is based in the US.

I don't do track riding so db is not a big issue, anything has to be quieter than those Termis thundering off the ground.

So Far with RedLine all my emails have been responded to within a few hours.

I did a little (very little) digging. It looks like one of the founders/owners of Redline is CEO of a manufacturing firm with multi-national facilities that design and manufacture titanium parts for another industry. It seems they have 60 some patents for their products.

It was probably a startup out of need for a good US based company that makes exhaust for exotics and with a few engineers from the other company that raced they decided to try their hand at exhaust systems. Just speculating on this part though.

I'll hopefully be home when it arrives and give ya'll install pics in a reasonable amount of time.
 
Last edited:
Finally a heat solution, only 10lbs and it looks beautiful. Might be time to get a 1299 with a Redline under tail exhaust.
 
Is this a track only pipe? I don't see how you'd mount your license plate with these cans mounted unless you went back to that huge stock license plate holder


Sent from my iPhone using Tapatalk
 
timwu12 said:
Is this a track only pipe? I don't see how you'd mount your license plate with these cans mounted unless you went back to that huge stock license plate holder


Sent from my iPhone using Tapatalk
Click to expand...

Well, from an emissions standpoint it's a track only exhaust. I'm going to switch back to my stock plate mount until I find or fab an alternative. I would assume that someone will make a tidy tail type plate mount for the 1299 Final edition, which would probably work. Termi offers a new plate mount for their under tail and that might work with this as well.
 
rpm429 said:
I figured I'd start a thread here just for the RedLine Exhaust since an offshoot discussion started in the AR under tail thread, and redline fits 1299 and 1199.

I ordered this https://www.redline-moto.com/. It is expected to be delivered in November.

I will try to get a before and after dyno runs on the same dyno, with similar weather conditions. I currently have the Full Termi tuned with tuneboy version 6.

I almost went for the Termi undertail but I think it is a bit close to the rear bodywork for my liking, and it's ~3300USD without import tax for stainless headers. Redline is based in the US.

I don't do track riding so db is not a big issue, anything has to be quieter than those Termis thundering off the ground.

So Far with RedLine all my emails have been responded to within a few hours.

I did a little (very little) digging. It looks like one of the founders/owners of Redline is CEO of a manufacturing firm with multi-national facilities that design and manufacture titanium parts for another industry. It seems they have 60 some patents for their products.

It was probably a startup out of need for a good US based company that makes exhaust for exotics and with a few engineers from the other company that raced they decided to try their hand at exhaust systems. Just speculating on this part though.

I'll hopefully be home when it arrives and give ya'll install pics in a reasonable amount of time.
Click to expand...

RPM, I am still sitting on the fence with this one and am waiting on the dyno figures. Not too worried about the db figures as the bike spends almost all its life on the street anyway, but it would be good to have the option so I don't alientate myself from my neighbours. I also need to work out what the cost of shipping would be to the UK plus import taxes/duty as that will bump the price up considerably. Lastly I'll be selling my full Akra system to fund this and would also be keen to see what solution they come up with re: licence plate holders, though I have the shorter CDT carbon one fitted which might be OK, as we can't get away with the undertail plate holders you guys in the US seem to fit prolifically to the Panigale.
 
timwu12 said:
Is this a track only pipe? I don't see how you'd mount your license plate with these cans mounted unless you went back to that huge stock license plate holder


Sent from my iPhone using Tapatalk
Click to expand...

You think you could get a near straight through pipe on track?! Good luck with that.....
 
Does it do away with the kickstand like the SL?

Its the best exhaust option I've seen so far thanks for posting it
 
Just watched their video. Funny how the brake lever guard falls due to the vibration and I'm guessing improper installation
 
Macattack said:
Does it do away with the kickstand like the SL?

Its the best exhaust option I've seen so far thanks for posting it
Click to expand...

They have said they will now be producing two versions of the bellypan.

Race: as per the photos, with a larger enclosed catch tank type profile. No facility for a side stand

Street: low profile version, that follows the lines of the lower fairing. I don't know if this fully encloses the pipework underneath or not, as they have yet to publish the design. Sidestand can be used with this design, so they claim.
 
Very nice! I've been looking for a full Ti exhaust at a reasonable price.

I hope it'll clear race bodywork. I have SS.
 
rpm429 said:
I figured I'd start a thread here just for the RedLine Exhaust since an offshoot discussion started in the AR under tail thread, and redline fits 1299 and 1199.

I ordered this https://www.redline-moto.com/. It is expected to be delivered in November.

I will try to get a before and after dyno runs on the same dyno, with similar weather conditions. I currently have the Full Termi tuned with tuneboy version 6.

I almost went for the Termi undertail but I think it is a bit close to the rear bodywork for my liking, and it's ~3300USD without import tax for stainless headers. Redline is based in the US.

I don't do track riding so db is not a big issue, anything has to be quieter than those Termis thundering off the ground.

So Far with RedLine all my emails have been responded to within a few hours.

I did a little (very little) digging. It looks like one of the founders/owners of Redline is CEO of a manufacturing firm with multi-national facilities that design and manufacture titanium parts for another industry. It seems they have 60 some patents for their products.

It was probably a startup out of need for a good US based company that makes exhaust for exotics and with a few engineers from the other company that raced they decided to try their hand at exhaust systems. Just speculating on this part though.

I'll hopefully be home when it arrives and give ya'll install pics in a reasonable amount of time.
Click to expand...

You aren't far off there.
 
We are gonna have our numbers and graphs up soon, we have gains across the entire curve. our stock comparisons are against an Akrapovic system.
 
I like the exhaust, but that belly pan needs to be raised. Right now it looks like the bike is pregnant.
 
rrgermanlv said:
Just watched their video. Funny how the brake lever guard falls due to the vibration and I'm guessing improper installation
Click to expand...

Must be the top engineers and ex racers who installed it?!

Redline Moto said:
We are gonna have our numbers and graphs up soon, we have gains across the entire curve. our stock comparisons are against an Akrapovic system.
Click to expand...

I want to like this product, I really do, but I'm still very skeptical of it...... hurry up and prove me wrong!

As it stands, I'm even more skeptical of the V4. I want to keep my R and tune it, this is top of my list if your numbers are good and you can produce DB killers. If not its Akra slip ons with baffles
 
Their website says arrives November 2017 which could mean beginning, middle, or end. I'll start to be concerned if 12/1 rolls around and I don't have a system, email with tracking info, or an email stating there was a delay.
 

Similar threads

O
2023 Streetfighter V4 Euro 5 Tuning
2
Replies
37
Views
5K
Mogsal
M
T
BrenTuning Flash Development (Tech Talk)
17 18 19
Replies
379
Views
83K
Sammy
S
Z
new Temi under tail exhaust
2
Replies
39
Views
10K
Nathanhu
N
White13Pani
Some perspective on exhaust pricing; Akra
2
Replies
29
Views
6K
bradp51
bradp51
duc
A conversation about Ducati...
2 3
Replies
41
Views
10K
BAIBAICOP
BAIBAICOP

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top