School me on LHRB (left hand rear brake) for V4

Ducati Forum

Help Support Ducati Forum:

I haven't generated the fan club or deemed worthy by paparazzi, i'm sure there's a traffic light somewhere that has me well above posted speed limit
 
This is the information I was looking for… thank you.

Astral11 said:
The bottom right line is the rear master cylinder to ABS pump. The S line above it is the supply from ABS pump to the rear brake caliper. By removing both of these lines, and installing plugs at the ABS pump and disabling ABS in the dash and staying in Race setting, that is Rear ABS delete. You have to buy a specific line that goes from rear master cylinder directly to the rear caliper. It would be nice to find a brake line kit that supplies the front ABS line but deletes the rear, to fully utilize the Ducati software but somehow no one offers that kit

View attachment 51674
Click to expand...
 
Astral11 said:
The bottom right line is the rear master cylinder to ABS pump. The S line above it is the supply from ABS pump to the rear brake caliper. By removing both of these lines, and installing plugs at the ABS pump and disabling ABS in the dash and staying in Race setting, that is Rear ABS delete. You have to buy a specific line that goes from rear master cylinder directly to the rear caliper. It would be nice to find a brake line kit that supplies the front ABS line but deletes the rear, to fully utilize the Ducati software but somehow no one offers that kit

View attachment 51674
Click to expand...

Astral, small mistake on the information you've provided here. According to the service manual, 'S' in your image is going to the rear master cylinder and 'R' is going to the rear brake caliper:
Screenshot 2023-10-05 094104.png
Screenshot 2023-10-05 094142.png
 
Oh, my verbiage was slightly off - good thing this thread pertains to ABS Delete/LHRB and not installing the rear ABS
 
Alkhater said:
Makes sense… S is the supply for MC to ABS, R is return from ABS to caliper.

Not the labeling I’d use but ok 👍
Click to expand...

Thanks Alk, that is indeed what I meant. Labeling is correct



@andyb well I guess that must be the fan club lol, "enemies on this forum" how trivial 😂 i should start a poll and send out tshits
CoolSparky said:
I know you think you're trying to be helpful, and you seem to be knowledgeable on some things, but all you're doing is making enemies on this forum

You are correct that he did a great 1st attempt but his safety wiring technique has fundamental issues that we need to help him with. If you've done any type of safety wiring in your life you would know this is not correct:
View attachment 51685
Click to expand...
 
The opinion of IT trained, mechanic poseurs makes my coffee taste slightly better, not bitter. Reminds me of an aftermarket double sided swingarm "that'll work"
 
RickD996 said:
I, personally, never use the rear brake 🤷

But, people that do, say they're on it all the time. Corner entry (as you're braking), mid corner (help tighten the line), and anti-wheelie. I know some fairly slow riders that use it too, so can be used by all levels.

I have my engine brake set higher than I used to (ie more engine breaking), and am still setting PBs, maybe a connection!
Click to expand...

Hello, +1, once you've tried the rear brake in tight corner, it is amazing how the bike turns. I would also go for the "scooter" brake but Beringer has this product: Thumb brake - Beringer Brakes
 
artvtheone said:
Hello, +1, once you've tried the rear brake in tight corner, it is amazing how the bike turns. I would also go for the "scooter" brake but Beringer has this product: Thumb brake - Beringer Brakes
Click to expand...

I’ve had the IMA thumb brake on my bike for some time but only recently started using it often. For sure I think the index finger brake (scooter) style brake will be easier to modulate.

I order the Dicacciati setup to try
 
Gents, here's an update, I got this project done over the winter.

PXL_20240405_185224693.jpg

Brembo RCS16 clutch master. Custom line straight to rear caliper. Needed new clipon for real estate since I have stock swithgear.

I have two days on this setup so far and its AWESOME. I find it natural to use one finger (middle finger) to drag the rear brake when needed.
 
I liked the index finger brake much better than the thumb brake on the Ducati…but for whatever reasons I like the thumb brake setup better on the KTM at track.

I’m running the Discattiati thumb brake, and on the RC 8C I find I’m actually using it a lot more…I use it on almost every corner now.

Very cool setup Tom…I also ran a line directly from the clip on to the rear caliper. This is the way.

Did you remove the foot brake altogether?
 

Attachments

  • IMG_1884.jpeg
    IMG_1884.jpeg
    1.5 MB
Hola,

Compré un Thumbrake y una bomba trasera doble.

¿Puedes ayudarme con la instalación?

Dado que la bomba trasera es doble, no pierdo el freno de pie trasero, pero no sé dónde está conectado, el que viene directamente de la pulgar y el que viene del ABS. Gracias.

Saludos✌🏽
 

Attachments

  • Screenshot_20241111_000510_WhatsApp.jpg
    Screenshot_20241111_000510_WhatsApp.jpg
    803.5 KB
  • Screenshot_20241111_000457_WhatsApp.jpg
    Screenshot_20241111_000457_WhatsApp.jpg
    856.8 KB
  • Screenshot_20241111_000447_WhatsApp.jpg
    Screenshot_20241111_000447_WhatsApp.jpg
    1.1 MB

Similar threads

R
Rear brake, hub and swingarm very hot
2
Replies
22
Views
792
Astral11
Astral11
R
V4 brake burning
Replies
10
Views
375
Paul G
Paul G
M
RCS 19 Lever Wiggle- Bushing Kits Available?
Replies
10
Views
334
J D V 4
J D V 4
Steven31371
Karl Brake MC
2 3
Replies
42
Views
1K
SuperDomestique
SuperDomestique
jmlrkvmd
Rear Brake Useless
Replies
1
Views
594
SuperDomestique
SuperDomestique

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top