Help w/ Brake line measurements

Ducati Forum

Help Support Ducati Forum:

Rogue

Rogue

Joined
Feb 25, 2013
Messages
1,208
Location
TX
I'm bypassing the ABS and need new lines. The channel I was going through dried up so I've decided on custom lines from Core Moto. They need measurements and I'm away from the bike for a few months. I was hoping to have everything ready to go when I return home.

If any of you guys could get me the following measurements I'd really appreciate it. I would like the T in the middle of L4 if possible. Thanks in advance.
 

Attachments

  • coremoto.PNG
    coremoto.PNG
    39.7 KB
Alright, let’s try this. Free Ti race drilled caliper bolts for whoever can get me the measurements.
 
Sorry can't help with dry break measurements, I'm sure someone will join in.
 
Last edited:
If I can just get the basic measurements I’ll account for the staubli dry breaks.
 
Rogue,

Here’s what I got. 17” from banjo to banjo on the calipers using all factory parts. With factory parts, L1 is a bit tricky since the line snakes to the ABS module. I can get you a general measurement from the master cylinder to the corner of the fender.

If I’m going in the right direction, I can keep measuring.

aca0fe86af0e868b480fbaac45e8fdfc.jpg



Sent from my iPhone using Tapatalk
 
51178e5c77d844aebc29cc1af9445d3e.jpg

From brake MC to the middle of the front mudguard it’s 20.5” but core moto doesn’t do half sizes so you’ll have to go to 21’’

T from middle of mudguard to the right caliper it will be 9”

T to the left caliper will be 9”

You’ll need 20 degree upward angle for each banjo fitting

Those measurements were taken also with the wheel turned all the way right which would make the line the tightest, so a little slack was given at that point.

I just replaced all my lines which came out well.


Sent from my iPhone using Tapatalk
 

Similar threads

M
Please help me with my check engine line and Melcodiag experience
Replies
4
Views
218
Marbles
M
Weaver412
Brake pressure switches
Replies
2
Views
364
JBJR
JBJR
KA77
23 V4R Loosing Oil…… Some Oil Found in Airbox
3 4 5
Replies
82
Views
2K
panibadboy
panibadboy
S
Idle gear (plastic) and primary sprocket failure – 2017 1299 Pani
2
Replies
20
Views
1K
baggerman
B
Steven31371
Highly modified V4S versus KTM RC 8C
2 3
Replies
50
Views
2K
baggerman
B

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top