- Joined
- Sep 29, 2013
- Messages
- 1,147
- Location
- Chicago, IL
Help Support Ducati Forum:
My 1199R stalls occasionally in 2nd gear decels after I put the clutch in. I put a zip tie around the pin that activates the micro-switch instead of bending that piece of metal, things improved, but yesterday, it did its 2nd gear stall again.
- Joined
- Sep 29, 2013
- Messages
- 1,147
- Location
- Chicago, IL
It doesn't matter what gear for me. Once I pull the clutch in coming to a stop it occasionally stalls.
Last edited:
At around 300 miles or so mine started stalling. Tremi is already installed and the canister is not. Took it in for the 600 mile ck up yesterday they remapped it at that time. On the way home it stalled once, in N it would only show 1st or bounce between N and 1st, also the yellow from 6k to 11k was still there. Parked it over night then went out this morning rode 200 miles. Today everything is fine. No stall, gear indicator is fine, and RPM is black from 0-11k. All is fine.
- Joined
- Sep 29, 2013
- Messages
- 1,147
- Location
- Chicago, IL
I'll check the vent hoses to make sure they are not switched when I install the quick disconnects. I has no charcoal canister.
Thank you.
Thank you.
- Joined
- Sep 29, 2013
- Messages
- 1,147
- Location
- Chicago, IL
Hello.
Update:
The stalling issue on my R is gone. My guess is the closed-loop system took a while to self-correct after I changed the Termis to Akros.
Very happy rider here. This bike is amazing.
Update:
The stalling issue on my R is gone. My guess is the closed-loop system took a while to self-correct after I changed the Termis to Akros.
Very happy rider here. This bike is amazing.
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
