2023 V4R // 2023 SEASON

KarlKani said:

dry break fuel line connection

Click to expand...

What size hose and fittings did you use? When I measure the OEM fuel line, its 9mm ID on one end and 7mm ID on the other.

Kev242 said:

Have fun at OVRP, know there is quite a fun crowd there.

Was the side mounted steering damper just for cockpit clearance for the thumb brake?

Click to expand...

The thumb brake line runs right thru there and it just made it easier to fit the line and allow for it to move a bit when turning the bars

bp_SFV4 said:

What size hose and fittings did you use? When I measure the OEM fuel line, its 9mm ID on one end and 7mm ID on the other.

Click to expand...

I didn't measure - it came from M.MotoCorsa so I didn't have to.

KarlKani said:

I didn't measure - it came from M.MotoCorsa so I didn't have to.

Products - Kit sgancio rapido benzina Panigale V4

www.m-motocorsa.it

Click to expand...

Did it come complete with the hose and fittings?

Yes

Got the bike all buttoned up fo rNJMP yesterday 05.04.24 - it was meant to be mid 60s overcast. Was low 50s first session then slightly warmer at 10 so I turned off the warmers got helmet and gloves on then it started lightly raining. Rained lightly the rest of he day, packed it up and went home after lunch. Would have loved to have jsut done 2 shakedown sessions, instead I wore a new suit for a couple hours - felt great.
Anyway bike is all sorted except for rear shock pot still hasn't arrived. Seat feels really good, sitting much more in the bike lowest point where it meets the tank I didn't measure but old seat was flush to tank pad so this new one is a good 10mm lower. I never felt as locked on to tank on the 23 compared to the 19 but I believe that is mostly due taller rear geometry (even tho I have lowered it) lets see when I get some laps in but I may even have to lower pegs. If you look at the measurements compared to flat new RaceSeats It it is a lot wider. The other seat base is the current WSBK V4R seat, it doesn't work with my subframe and I had foolishly ordered this one first but I measured it to see the differences of all 3. Before heading to the track I hadn't gotten my AIM setup configured, so when I got home I pulled out my POS pc laptop and got it sorted - except the rear pot. It's so difficult to use a PC, the thing wouldn't load a website for 25 min - then I discovered it was because the clock/date were not correct!!! How does a comp connected to the World Wide Web not know the date + time wowwwww.

If you want the material that RaceSeats uses I think I found it on eBay when I was looking into making my own seat

Any idea how much weight was saved with the Speed Carbon bodywork over stock (ballpark estimate)? And did you option it to have a Kevlar lined?

KarlKani said:

View attachment 54554

Click to expand...

Nice van !

SuperDomestique said:

If you want the material that RaceSeats uses I think I found it on eBay when I was looking into making my own seat

shark skin neoprene fabric 2mm 3mm with one side embossed and other side bonded | eBay

Black Neoprene rubber, one side embossed skin, other side can be coated black polyester fabric, or no coated anything. Item : embossed skin neoprene rubber fabric. The following photo, one side embossed skin, and other side bonded black fabric, it is like mouse pad.

www.ebay.com

Click to expand...

Maybe, looks similar. Race seat uses 5mm

SuperDomestique said:

Any idea how much weight was saved with the Speed Carbon bodywork over stock (ballpark estimate)? And did you option it to have a Kevlar lined?

Click to expand...

No idea, no Kevlar

Went to Milan, then to Le Mans

What's happening in Milan?

All kinda jumbled

Tires showed up today