Ducati Panigale V4 916 25 Anniversario Build Thread

[TsaiCo]

Hi TsaiCo,
Thanks for your kind comment.
I do not plan to install after market mirrors or the standard mirrors.

Last night, I just ordered Ducati OEM Front and Rear Paddock Stand plus the Ducati Performance Carbon Tank Pad Protector.
I contacted Dynamoto if they are willing to produce their stand in RED color instead of their Orange, however, they only produce Black color as alternative to Orange but not RED.
Eventually, I will need to buy those Dynamoto stand just to make my life easier moving the bike in my living room (when I need to install the modified parts), but maybe later...

Have you thought about Bursig stand from Germany?

I had one for my S1000RR, was thinking to do it for V4


Sent from my iPhone using Tapatalk

 

[torrific]

I have the Dynamoto stands. You will like them a lot whenever you get them. For the price, can't beat the convenience of moving it around with ease. Parking the Duc in the garage and then putting it up on the stands to turn them around for the next ride is sheer ease.

 

[BMW Alpina]

Have you thought about Bursig stand from Germany?
I had one for my S1000RR, was thinking to do it for V4
Sent from my iPhone using Tapatalk

I have the Dynamoto stands. You will like them a lot whenever you get them. For the price, can't beat the convenience of moving it around with ease. Parking the Duc in the garage and then putting it up on the stands to turn them around for the next ride is sheer ease.

Hi TsaiCo, I look into Bursig stand but they require special adapter, and if I am not mistaken require a bit part of the fairing on our Panigale V4 to be cut or something like that. I don't want to have special adapter permanently attached to my bike, and especially I don't want my fairing to be cut. (but I could be wrong about the fairing cutting, maybe it was for the 1299 Panigale)...

Anyway, I think the Dynamoto stands is the best for moving the bike around (and I will buy them later), but for now and for static display, nothing beat the looks of a simple Ducati OEM stand in Red
30 years from now, the Ducati OEM stand that I purchase will be "period correct" to my bike

I also going to buy ABBA SUPERBIKE STAND Front & Rear Package 2 $285 plus some Amazon Center Lift Scissor Jack (around $70) when I am installing the AELLA lowering link (to lower the bike) and also when I replacing the Ohlins Spring to 80N/mm..

I guess, I will have 3 different stands for every occasion

 

[Bruce Wayne]

Hi Bruce Wayne,
To post a picture, you need to click on the button with this image View attachment 29267
Then you can either drop and drag or click again (where it say click here) then browse from your hard drive in your laptop/PC.
However, this website limit the size of the picture so you might need to resize to "web large" size.

I hope you can upload pictures soon

 

[BMW Alpina]

I ordered a few more parts this past few days listed below:

Aella Parts:
AELLA : Lowdown Link Plate [AE-69008-HA] Lowdown Link Plate By: AELLA Part Number : AE-69008-HA
AELLA : Rear Axle Nut Lock Pin Set [AE-74002-BK] Rear Axle Nut Lock Pin Set By: AELLA. Color: Polish Part Number : AE-74002-PO
AELLA : Titanium Washer (for Brake Mount) [AT-W0001] Titanium Washer (for Brake Mount) By: AELLA Part Number : AT-W0001
AELLA : Brake Caliper Support Collar [AT-W0005] Brake Caliper Support Collar By: AELLA Part Number : AT-W0005
AELLA : Rear Suspension Hook Wrench [AE-76998] Rear Suspension Hook Wrench By: AELLA Part Number : AE-76998

ProTi Parts:
Proti Titanium Rear Brake Caliper Bolt Kit for Panigale V4 V4S V4R Speciale (Silver Color)
Proti Titanium Front Brake Caliper Bolt Kit for Panigale V4 V4S V4R Speciale (Silver Color)

CNC Racing Parts:
Socket drive tool for front and rear wheel nuts DUCATI COLOR: Black - CHD02B
Turn Indicator - Mounting adapters license plate holder COLOR: Black - IDA51B

Rizoma Parts:
Rizoma "CORSA" LED Turn Signal (RED Color) PART NUMBER FR110R
Turn Signal Cable Connector Kit by Rizoma PART NUMBER EE079H
Rizoma CT455B Fluid Reservoir Bracket PART NUMBER CT455B
Hose Clamps - Brembo Size PART NUMBER BREM706001

Desmoworld Tools and Parts:
DESMOWORLD BLACKTOOLS Hakenschlüssel zum Kettespannen #123 für Einarmschwingen BT.ESEAS123
Desmoworld Spacer für Lenkerarmatur DW.SFLA
Desmoworld BLACKTOOLS Steckschlüssel für die Lenkkopfmutter der Panigale V4 BT.LKM.V4
Abdeckhülsen für M8 Blinkergewinde, 1 Paar 207-130


And some Ducati Keychains for both main and spare key arrived today:

 

[torrific]

Which fender eliminator are you going with?

 

[DucatiKev]

I vote for the tagless option

 

[BMW Alpina]

Which fender eliminator are you going with?

Hello, at this moment, I installed the original Ducati License Plate Holder Block Off, Part#97180661B that came with the 916 25 Anniversario kit.
Below is the picture when I installed it last week:


But I also already have the Ducati Performance Carbon License Plate Holder, which I will pair with Rizoma Corsa LED Turn Signal (IN RED COLOR) that I purchased yesterday and should arrived in 10 days.
So I might installed the Ducati Performance Carbon License Plate Holder on my bike. Below is the picture, without any LED Turn Signal yet...



Having said that, I will also purchase Peter Lieb Carbon Fiber License Plate Holder Block Off soon (he is currently making it). Because I want to swap all the rear subframe (side and lower) cover with the Carbon Fiber one from Peter Lieb.
This way, I can swap them depend on my mood on how I want the bike to looks like

 

[torrific]

Ah right right. Thought you were going with the AELLA piece too since you went full AELLA on several items already. That's what I went with and added Rizoma "Vision" Sequential LED turn signals. A bit pricey, but I really dig the look.

 

[BMW Alpina]

Ah right right. Thought you were going with the AELLA piece too since you went full AELLA on several items already. That's what I went with and added Rizoma "Vision" Sequential LED turn signals. A bit pricey, but I really dig the look.

Yes, I also love the Rizoma Vision, and was torn between it and the Rizoma Corsa. Initially I want to use Ducati Performance LED turn signal but it looks too "curvy" and not that much different than the stock one...
The Vision looks very modern and sporty, and I think the Corsa is the middle ground between the Ducati Performance and the Vision because it is not as flashy as the Vision nor as stocky as the Ducati Performance..
Plus, I did not see many people post on the internet with the Corsa... while the Vision is more popular... so I choose the slightly less popular and "lower profile" one

 

[BMW Alpina]

I was planning to install my AELLA frame slider today, however, since I park my bike close to the living room wall, it will require me to maneuver the bike away from the wall and I just don't feel like doing some acrobatic moves today.
So I just placed an order to Dynamoto for the DUCATI Front and Rear Stand Set × 1
Ducati Panigale V4/R/S/Speciale (Spindle diameter 40.6 mm)

Stephen Mcguiness, the owner of Dynamoto was very helpful in convincing me this is the right stand. He even take time to reply to my email during weekend. The customer service alone justify the premium price.
I am really looking forward to start using the Dynamoto stand when I need to maneuver/move my bike from it's static position.

 

[DucatiKev]

Yeah that stand is cool. I just grab my rear wheel and move it, the bikes not THAT heavy

 

[BMW Alpina]

More parts arrived today:
CNC Racing Wheel Nut Socket and CNC Racing Mounting Adapter for Turn Signal (to be used with Rizoma Corsa turn signal, but CNC Racing design of this mounting adapter is better than Rizoma's)



ProTi Forged Titanium Front and Rear Brake Caliper Bolt, I will install this to remove the front yellow reflector once the Titanium Spacer and Washer from AELLA arrived:

 

[BMW Alpina]

I just notice there is a very slight blemishes on my Ducati by Rizoma Brake Level Protector so I am posting it on the classified section for sale:
For Sale - Ducati by Rizoma Brake Lever Protector Part# 96180521A (almost brand new) for Panigale V4

 

[cruzin2]

I just notice there is a very slight blemishes on my Ducati by Rizoma Brake Level Protector so I am posting it on the classified section for sale:
For Sale - Ducati by Rizoma Brake Lever Protector Part# 96180521A (almost brand new) for Panigale V4

I sent you a PM on this

 

[BMW Alpina]

I sent you a PM on this

Thanks so much Cruzin2,
I will ship it to you later today after work. Thanks again

 

[Rogue]

I guess I’m the only one. But I’m failing to see how some valve caps, a tail tidy, and a few bolts ons account for a “build thread”

What’s been built?

 

[DucatiKev]

Haha

 

[BMW Alpina]

I guess I’m the only one. But I’m failing to see how some valve caps, a tail tidy, and a few bolts ons account for a “build thread”

What’s been built?

Hello Roque, it looks like we have different definition of "Build Thread". For me, it means building a bike (or car) that will be personalized and meet my idea of how the bike should look (or in some cases) perform.

If you notice my first post, I plan to do more modification and my goal is to finished it by next year. So, there will be (a lot) more parts replaced on my bike as time goes along (and as my cash flow allowed),
I hope you have the patience to follow my BUILD Thread for a year or so

However, if you are expecting me to ... replace a frame with the carbon fiber frame from superleggera (or the carbon swing arm) or replace the engine with a WSBK Engine or such... then I think you will be disappointed, it will not be that "epic"
My main goal in BUILDING my bike is to make it look as nice as possible since this bike will not be ridden and only for static display and my viewing pleasure.
I just want to make sure you are clear of what to expect when you are visiting/following my thread and the last thing I want is to have you wasting your time (or expectation).

 

[cruzin2]

i'm enjoying the pictures and your ideas.