2023 V4R // 2023 SEASON

Ducati Forum

Help Support Ducati Forum:

And for one more I’m using a CF front subframe from MotoComposites with the FullSix fairings and the stock air intake with VultureBike fake headlights and tail lights.
 
SuperDomestique said:
What cush drive pins did you use? Stock or does the flange come with some?

I also noticed that there are 2 Sitta flanges/hub carriers for this system:

226D01 (from WRS.it)
View attachment 51711
206D02 (from TGP)

View attachment 51712


The 206 has the recess for the nut and must use stock cush drive pins
Click to expand...

226 doesn’t come with cush drives, I’m using AEM.

226 has integrated drive pins so it doesn’t need hub fasteners.
 
KarlKani said:
I don't have pics with the failings off
intake is Speed Carbon - came with my fairings

View attachment 51715

View attachment 51716
Click to expand...

What holds the carbon air intake y piece that sits against the fairing nose/ Obviously I can just continue with the std headlight dummy or

Is it just this piece required?
Screenshot 2023-10-07 at 08.50.50.png
 
SuperDomestique said:
What cush drive pins did you use? Stock or does the flange come with some?

I also noticed that there are 2 Sitta flanges/hub carriers for this system:

226D01 (from WRS.it)

206D02 (from TGP)

The 206 has the recess for the nut and must use stock cush drive pins
Click to expand...
So I guess the WSBK flange is the issue and the normal flange should be ok? Maybe... Presumably it’s not the cush drives.

The WBSK one (first one) works the same as the Ghost one from AEM - not bolts for the cush drives.

Do we know if anyone has tried the standard Sitta flange?
 
Last edited:
andyb said:
What holds the carbon air intake y piece that sits against the fairing nose/ Obviously I can just continue with the std headlight dummy or

Is it just this piece required?
View attachment 51717
Click to expand...

There are internal fins at mid height of airbag that my intake has notches to slide into, it essentially just holds it in place until you fit the front fairing which seat into intake holding it in place. I have previously drilled and used 4mm bolt inside center downside of intake to seat the intake but it's not that necessary.
 
KarlKani said:
I had no issues, set right in. Looks like yours is off on the left side there..? Is that lower right section lined up?
Click to expand...

the two main mountings line up perfect and appear to be in the same orientation as the original. at the end of the day its only the side support that's not aligned. If if force the rubber threaded end into the U piece it twists the imu away from square...

my front subframe is the one with removable headlight holder brackets the IMU bracket comes off the rh one.

ill cut it and drill it and make a better shape.... I have emailed Pierobon.
 
Last edited:
andyb said:
the two main mountings line up perfect and appear to be in the same orientation as the original. at the end of the day its only the side support that's not aligned. If if force the rubber threaded end into the U piece it twists the imu away from square...

my front subframe is the one with removable headlight holder brackets the IMU bracket comes off the rh one.

ill cut it and drill it and make a better shape.... I have emailed Pierobon.
Click to expand...

This is odd because there is no difference btw the 2 stk front stays other then the removable headlight holders... Mine just fit right in no problem - lets see what they say
 

Similar threads

JohnSmith
For Sale 2023 Ducati V4R
Replies
2
Views
367
JohnSmith
JohnSmith
JohnSmith
For Sale Akra Exhaust + lots of V4 parts
2
Replies
20
Views
1K
JohnSmith
JohnSmith
01COCCOBET
Riding bikes
Replies
0
Views
75
01COCCOBET
01COCCOBET
V
Severe issues with 2023 Panigale V4R. Need help.
6 7 8
Replies
156
Views
8K
Lefty
Lefty
roadracerx
2023 V4R info to keep in mind
11 12 13
Replies
246
Views
13K
Sutki
Sutki

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top